Tryckrör och kopplingar - sita 40

Viega 1126XL

Material:Pipes and fittings: AISI 316 (1.4401)O-ring: EPDM (LBP) Leak Before PressedApplication:Media: waterTemperature: -35/+135 CPressure: Max. 16 barApproval: VA

Adapter mt cst d22-r3/4 zn-pl

Geberit 23108 rördelar för avlopp, avfall och ventilation (DWV)

Viega 1118

Viega 1112

Viega Sanpress bend 90° 22 Red brass/blank, 108120

VSH T-fitting with socket/socket/socket 88.9x76x88.9 mm acid-resistant.

XPress Carbon straight connector ØF 22XRp1/2

Viega 2616

Viega 2416.1

Press connector systems with press connectors and pipes made of non-alloy steel 1.0308 (E235), in acc. with EN 10305-3, externally galvanised with a zinc layer thickness of 8–15 m (blue chromatised).Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingRed symbol (to prevent confusion with Sanpress Inox (stainless steel) articles) »Not for drinking water installations«Sealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber),not resistant against hydrocarbon solvent, chlorinated hydrocarbon solvents, turpentine, petrol, FKM, dull blackDimensionsD38

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Sanpress Inox Crossover with SC-Contur- steel non-corroding- plug-in end, press connectionComponentsEPDM sealing elementd: 15

Sanpress Plug-in piece- gunmetal or silicium bronze- plug-in end, R-threadComponentsPolygon.

Sanpress Inox Plug-in piece- steel non-corroding- plug-in end, R-threadComponentsPolygon d: 28, R: 1

Viega 2215.1

Sanpress Reducer with SC-Contur- gunmetal or silicium bronze- plug-in end, press connectionComponentsEPDM sealing elementd1: 42, d2: 28

Viega 1112

Viega 2259.5XL

XPress Carbon elbow 45 deg. FØ 35

For cold and hot potable water, For heating water, For cooling water without antifreeze agent, For cooling water with antifreeze agent, For remote network heating water 120 °C, For saturated steam 120 °C, For service water, For ultrapure water (except pharmaceutical water), For rainwater with a pH value of > 6.0, For grey and black water with pH value > 6.0, For extinguishing water (wet), For sprinklers (wet), For chemicals and technical liquids, For compressed air (oil purity class 0–3), For negative pressure, For inert gases (e.g. nitrogen), For industrial gases (e.g. acetylene, shielding gases), For technical building systems, industry and shipbuilding, Application overview: Geberit Mapress Stainless Steel for liquid media, Application overview: Geberit Mapress Stainless Steel for gaseous media.

Fittings for hot-dip galvanized steel pipes, for heating systems. Steel unalloyed 1.0034 E 195 AISI 1009.

Viega 2211

Adapter mt w/ plend cst d15-r1/2 zn-pl