Tryckrör och kopplingar - sita 31

XPress Carbon elbow 45 deg. FØ 15

Coupling cst d35 zn-pl

Viega 1112

Viega 1111

Viega 1115XL

XPress Carbon elbow 90 deg. FØ 42

Viega 1115

Viega 1126XL

Press connector systems with press connectors and pipes made of non-alloy steel 1.0308 (E235), in acc. with EN 10305-3, externally galvanised with a zinc layer thickness of 8–15 m (blue chromatised).Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingRed symbol (to prevent confusion with Sanpress Inox (stainless steel) articles) »Not for drinking water installations«Sealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber),not resistant against hydrocarbon solvent, chlorinated hydrocarbon solvents, turpentine, petrol, FKM, dull blackDimensionsD38

For sanitary facilities and industry, for heating systems, cooling and industry.

XPress Carbon threaded T-piece FFF 54XRp3/4X54

For sanitary facilities and industry, for heating systems, cooling and industry.

For sanitary facilities and industry, for heating systems, cooling and industry.

XPress Carbon elbow 90 deg. FM 22XR3/4

XPress Carbon elbow 90 deg. FØ 22

For cold and hot potable water, For heating water, For cooling water without antifreeze agent, For cooling water with antifreeze agent, For remote network heating water 120 °C, For saturated steam 120 °C, For service water, For ultrapure water (except pharmaceutical water), For rainwater with a pH value of > 6.0, For grey and black water with pH value > 6.0, For extinguishing water (wet), For sprinklers (wet), For chemicals and technical liquids, For compressed air (oil purity class 0–3), For negative pressure, For inert gases (e.g. nitrogen), For industrial gases (e.g. acetylene, shielding gases), For technical building systems, industry and shipbuilding, Application overview: Geberit Mapress Stainless Steel for liquid media, Application overview: Geberit Mapress Stainless Steel for gaseous media.

Viega 2616

Profipress T-piece with SC-Contur- copper- press connectorsComponentsEPDM sealing elements, VdS certificationd1: 35, d2: 35, d3: 35

Profipress T-piece with SC-Contur- copper- press connectorsComponentsEPDM sealing elements d1: 18, d2: 18, d3: 18

Viega 2426.1

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Viega 2416.1

Sanpress Inox Adapter with SC-Contur- steel non-corroding- press connection, R-threadComponentsEPDM sealing element, polygon, VdS certificationd: 28, R: 34

Sanpress Inox Adapter with SC-Contur- steel non-corroding- press connection, R-threadComponentsEPDM sealing element, polygon, VdS certificationd: 22, R: 1

Viega 2315XL