Tryckrör och kopplingar - sita 25

Viega 2218

Geberit 30406 rördelar för avlopp, avfall och ventilation (DWV)

Viega 2611

XPress Carbon elbow 90 deg. FM 35XR5/4

XPress Stainless angle adapter 90 deg. FM 42XR3/2

XPress Stainless straight connector FM 42XR5/4

XPress Stainless reducer FØ 35X54

XPress Stainless axial compensator FF 22

Geberit 35309 vattenslangstillbehör Slanganslutning Rostfritt stål 1 styck

Viega 2218

Elbow 45° 2xS-PR.108x108

XPress Stainless straight connector FM 88.9XR3

Viega 2214.2

Tangentbord, bakgrundsbelyst, USB, tangentbrytare: Outemu Red

Fittings for galvanized steel pipes, for heating systems.

Geberit 31216 vattenslangstillbehör Slanganslutning Rostfritt stål 1 styck

Viega 2611

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Viega 2312

Viega 2311

Viega 2315.1

Sanpress Inox T-piece with SC-Contur- steel non-corroding- press connectors, Rp-threadComponentsEPDM sealing elements, polygon, VdS certificationd1: 42, Rp: 12, d2: 42

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Viega 2326

with SC-Contur• stainless steel• press connection, Rp-threadWithEPDM sealing