Viega Tryckrör och kopplingar - sita 3

Sanpress Plug-in piece- gunmetal or silicium bronze- plug-in end, R-threadComponentsPolygon d: 22, R: 12

Viega 2215.5

Viega 2215.1

Viega 2217.2

Sanpress T-piece with SC-Contur- gunmetal or silicium bronze- press connectorsComponentsEPDM sealing elements d1: 35, d2: 28, d3: 35

Sanpress T-piece with SC-Contur- gunmetal or silicium bronze- press connectorsComponentsEPDM sealing elementsd1: 22, d2: 15, d3: 22

Viega 2218XL

Press connector system with press connectors made of gunmetal, pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DINEN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene

Profipress T-piece with SC-Contur- copper- press connectorsComponentsEPDM sealing elements, VdS certificationd1: 35, d2: 35, d3: 35

Viega 2426.1

Smartloop Connection set- for hot water riser pipe with internal circulation pipe, hot water riser pipe from d28, circulation pipe d15- suitable for Smartloop Pipe PB 2007.3- gunmetal or silicium bronzeComponentsPlug, connection socketd1: 35, d2: 12

Viega 2415

Viega 1117.2

Viega 1115.1

Viega 1115.1

Viega 1112.1

Viega 1112

Viega 1111

Viega 1111

Viega 2612

Sanpress Inox T-piece with SC-Contur- steel non-corroding- press connectors, Rp-threadComponentsEPDM sealing elements, polygond1: 18, Rp: 34, d2: 18

Viega 2315XL

Sanpress Inox XL T-piece with SC-Contur- steel non-corroding- press connectorsComponentsEPDM sealing elements, cutting rings, separator rings, VdS certificationd1: 76.1, d2: 54, d3: 76.1

Viega 2326.1

Viega 2212