Viega Tryckrör och kopplingar - sita 23

Viega 2615

Viega 2215.1

Profipress T-piece with SC-Contur- copper- press connectorsComponentsEPDM sealing elements, VdS certificationd1: 28, d2: 28, d3: 28

Sanpress connection screw fitting with SCContur - gunmetal or silicon bronze - press connection, G-thread - flat sealing.Components EPDM sealing element, EPDM flat seal, union nut screw fitting.

Viega 2611

Viega 2611

Viega 2312.1

Sanpress Inox Connection screw fitting with SC-Contur- steel non-corroding- press connection, G-thread- flat sealingComponentsEPDM sealing element, EPDM flat seal, union nut screw fitting d: 15, G: 12

Viega 2318

Viega 2326XL

Viega 1112.1

Viega 2212

Viega 2211

Viega 2415

Viega 2428

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Viega 4212

Viega 2626

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Viega 2316.1

Profipress T-piece with SC-Contur- copper- press connectorsComponentsEPDM sealing elements d1: 18, d2: 15, d3: 18

Prestabo connection screw fitting with SC-Contur- galvanised, non-alloyed steel- press connection, G-thread- flat sealingComponentsEPDM flat seal, EPDM sealing element, polygon

Viega 2626.1

Viega 2215.1

Viega 1117.2