Tilta - sita 3

This articulating arm is the perfect option for mounting accessories to your camera cage such as external monitors, wireless video transmitters, electronic viewfinders and more.

The articulating nature of this arm along with a single tie down lock for all axes means users can easily re-position accessories on the fly which is especially helpful in fast paced shooting environments.

Weighing in at only 11oz, this arm can support up to 11lbs which makes it the strongest articulating arm in our current lineup.

The arm comes in two variations, one that features two NATO Receivers on each end and one that features two 1/4″-20 screws with locating pins .

- Mount Accessories via Cold Shoe Receiver, NATO Rail, 3/8"-16 and 1/4"-20 Threads with Locating Points
- Custom Designed for the Nikon Z8 Camera Body
- Arca Ready via Compatible Bottom Plate Perfect for DJI Ronin and Compatible Tripods
- Security Threads Provide Multiple Points of Contact for Improved Security
- Cable Clamp Secures Cables in Place with Convenient Thumb Screw Design

Designed for Tiltaing camera cages, the Left-Side Advanced Focus Handle, allows you to connect to the optional Nucleus Nano motor to control focus via a built-in finger wheel. It also features a record button for triggering record on/off over an optional Tilta R/S cable connection to compatible cameras. Multiple R/S cables are available, depending on your camera.

The handle attaches to the left side of your Tiltaing cage using your choice of an optional dedicated Left Side Handle Adapter—the Type IV, V, or VI version. Each of these attachment adapters use a different mount type, such as rosette or NATA rail.

The handle accepts a Sony F570 battery, sold separately. An included USB cable connects the handle to your Nucleus Nano motor to power it off the F570 battery and to allow finger-wheel focus control.

There are two connections on the handle: an 8V regulated USB Type-C output (where the USB cable plugs in) and 12 VDC output.

Tilta MB-T16-SCF kamerafiltertillbehör

Tilta WLC-T04-HWC-Z2 kameramonteringstillbehör Handhjulsadapter

Tilta TA-SFH1-97-G kameramonteringstillbehör Handtag

This camera cage provides complete protective armor for the Fujifilm X-T3 and X-T4 cameras.

It provides several 1/4”-20 mounting points as well as two cold shoe mounting points.

The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the Fujifilm X-T3/X-T4 cage includes: the base Fujifilm X-T3/X-T4 cage, quick release top handle, Arca and Manfrotto quick release baseplates, a clamp to attach an HDMI cable comfortably to the cage (one specifically for the X-T3 and one for the X-T4), and finally the Tiltaing Side Power Handle with Run/Stop Type I (F570 Battery) along with the compatible Fujifilm X series R/S cable.

Compatible with Type II Baseplates and Type I Side Handles.

These follow focus marking disks attach to the hand wheel of the FIZ hand unit to allow you to create drawn-on custom marks for accurate focus pulls.

The Universal Quick Release Shoulder Pad is fast and convenient. It allows for any camera with either a Tilta standard or Arri standard baseplate to slide and lock in for run-and-gun shoulder mounted set-ups without the need to screw on additional baseplates. It comes with two dovetail-style plates: one that is Tilta standard and one that is Arri standard so depending on your plate system, you can have your normal dovetail attached to your tripod and then quickly and easily slide off of that and onto the shoulder pad?s plate to be ready for handheld in no time. The pad is sturdy and firm yet very comfortable during operation.

The Quick Release Baseplate for Canon C500 Mk II/C300 Mk III connects to your camera via 1/4″-20 and 3/8″-16 tie down screws and features a non-slip, cushioned shoulder pad designed to be comfortable and secure.

The dual rosettes on each side of the baseplate allows users to quickly mount extension arms for better handheld support while the lens adapter support allows you to attach various lens mount adapters via a 1/4″-20 screw.

Front and back 15mm LWS rod supports allows you to easily mount accessories both in front of and behind the shoulder pad.

The baseplate’s VCT locking extension and locking toggle allows you to choose between mounting the baseplate to either a standard VCT plate or a Tilta standard dovetail plate.

Tilta MB-T15-C85 kamerafiltertillbehör Gängminskande filterring

Tilta MB-T15-67 kamerafiltertillbehör Adapterring för filterhållare

Tilta TA-T01-FCC-B kameraburar i metall 1/4, 3/8" Svart

- Custom Design for the Canon R7 Camera Body
- Mount Accessories via Cold Shoe, NATO, and 1/4"-20 Threads with Locating Points
- Arca Baseplate Supports 15mm Rod Based Accessories and Quickly Transitions to DJI Ronin
- Cable Clamp Secures HDMI and USB-C Cables via Thumb Screws for Stable Data Transmission
- NATO Top Handle Expands Mounting Options while Improving Flexibility for Operating & Handling

Using two included screws, this compact black Manfrotto Quick Release Plate attaches to the bottom of Tilta full camera cage for the Sony a7C mirrorless camera. The cage can then be mounted directly on tripod heads, ball heads, and other supports that accept Manfrotto-compatible camera plates.

Note: This quick release plate is not compatible with the Tilta 15mm LWS Baseplate.

Gravity G Series Smartphone Adapter
This adapter allows smartphones (with widths up to 3 inches) to be mounted to the G1/G2/G2X quick release baseplate. Additionally, this smartphone adapter can be used to mount a smartphone to any other ¼”-20 screw hole to fit your needs. The innovative design allows for the smartphone to be mounted vertically or horizontally in seconds.

The Tilta Universal Handgrip is a flexible handgrip system that attaches to either 15 mm lightweight or 19mm studio support rods. It consists of a rod bridge and two handgrips. Each handgrip consists of one 90° bend, a short extension, and a rubber hand grip. Each component of the handgrip assembly can be removed, and you can configure the system to suit your needs.

The rod bridge features a single knob that tightens/loosens the rod clamps so it is quick to mount or remove. The assembled system has six points of adjustment, three for each hand, so you can configure the handgrips so they are the most comfortable for you. The adjustment points feature Arri compatible rosettes and spring loaded locking levers. The rubber handgrips provide you with a comfortable sure grip.

Material of Construction CNC machined aluminum
Dimensions Boxed: 14 x 6.75 x 3.25" (35.6 x 17.1 x 8.3 cm)
Weight Shipping: 2.8 lb (1.3 kg)

Tilta RS-WLC-T04-LANC tillbehör till videostabilisator Kontrollkabel Svart Akrylnitrilbutadienstyren (ABS), Gummi, Rostfritt stål 1 styck BMCC, FS5/FS7, Blackmagic URSA, Blackmagic URSA Mini Pro G1/G2, Panasonic EVA1, Z CAM, Sony FX9/FX6, Panasonic BGH1

Tilta TA-T23-A-B kameraburar i metall 1/4" Svart

Tilta TGA-TMC kameramonteringstillbehör Monteringsklämma

Tilta MB-TM-WM fjärrkontroll för kamera RF Trådlös

Tilta Rosette Extender Arm Förlängningsarm

Tilta TGA-PPP-V tillbehör till videostabilisator Batteriplatta Svart Aluminium, Stål 1 styck DJI Ronin RS 2

Tilta TA-T01-A-B kameraburar i metall 1/4, 3/8" Svart

Tilta MB-TM-NMA kameramonteringstillbehör