Schneider Electric - sita 17

Schneider Electric Thalassa TBS elskåp Akrylnitrilbutadienstyren (ABS) IP66

Schneider Electric XB4BD21 strömbrytare Roterande brytare Svart

Zelio RSB are a series of compact plug-in relays with a width of only 16 mm.The relays are available with 1 C/O with either 12 and 16A or 2 C/O contacts with 8A maximum load.It is possible to insert a protection module (diode, varistor or RC-circuit) into the relay socket if needed.The sockets RSZE1S35M and RSZE1S48M has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RSB1A120P7PV is a complete plug-in relay mounted into a RSZE1S35M socket with a maintaining clamp, which secure that the relay stays in the socket even in an environment with vibrations.The socket has a varistor interserted for protection against voltage spikes generated by coils in the panel.The varistor module has also a build-in LED for indication of supply to the relay.RSB1A120P7PV has a 1 C/O AgNI contact with a maximum load of 12A.The relay has a lifetime of 100.000 cycles (depending on load).Supply voltage to the RSB1A120P7PV is 230 VAC and average coil co

Schneider Electric iCV40H strömbrytare 1P + N

Schneider Electric LC1D38P7 tillsatskontakter

TeSys GV2 - Circuit breaker - thermal-magnetic - 2.5...4 A - screw clamp terminals

white light block with body/fixing collar with integral LED 24V 1NO+1NC

white illuminated selector switch head Ø22 3-position spring return

red Ø40 mushroom pushbutton head Ø22 spring return

This Acti9 iTLc is a modular and reliable impulse relay. This 1P device has 1 normally open contact. The rated current is 16A, 24VAC to 250VAC operating voltage and it operates with 230VAC to 240VAC control voltage. Electrical endurance goes up to 200000 cycles for AC-21 or 100000 cycles for AC-22. The switching frequency is 100 switching operations/day or 5 switching operations/minute. The duration of the command order should be between 50ms to 1s. The degree of protection is IP20 and IP40 in an enclosure. It is DIN rail mountable. It is mainly used for lighting control applications. It allow centralized control of a group of impulse relays whilst keeping local individual control of each impulse relay. This product is compliant with IEC/EN 60669-1, IEC/EN 60669-2-2.

iCT 16A 2NO 230...240V 50Hz contactor

3 phase Kilowatt-hour meter for DIN rail mounting. with counter and Modbus communications.This model provides a direct measurement of I, D, P, Q, S, and E up to 63A. without CTs or additional power supply.iEM3000 series offers a cost-effective and competi

short terminal shield - 4 poles - 0<250

This Acti9 iC60N is a low voltage miniature circuit breaker (MCB). It is a 1P+N circuit-breaker with 1 protected pole, 6A rated current and C tripping curve. It can be mounted on DIN rail for modular installation. As circuit-breaker, its breaking capacity, according to IEC/EN 60898-1, is 6000A at 230VAC. As circuit-breaker, its breaking capacity, according to IEC/EN 60947-2, is 10kA at 230VAC. This miniature circuit breaker protects circuits against short circuit and overload currents. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. It becomes IP40 once in modular enclosure with insulation class II. its fast closing mechanism improves its service life. Its limitation class 3 (according to EN/IEC60898-1) improves downstream circuit protection cost. Its unique Visitrip indicator reduces intervention time by showing the faulty circuit. Its Visisafe green strip guarantees the physical opening of the contacts to allow downstream maintenance. This double terminal miniature circuit breaker reflects Schneider Electric expertise with more than 40 years developing modular devices for the protection of electrical circuits in all applications. It has a longer service life thanks to its high limitation and fast closing. This product is compliant with both IEC 60898-1 and IEC 60947-2, has IP20B finger proof terminals with double the tightening torque versus the standard and is DIN rail mountable. It offers VisiTripTM for safety during maintenance and VisiSafeTM to reduce intervention time.

This Acti9 iC60N is a low voltage miniature circuit breaker (MCB). It is a 3P circuit-breaker with 3 protected poles, 16A rated current and C tripping curve. It can be mounted on DIN rail for modular installation. As circuit-breaker, its breaking capacity, according to IEC/EN 60898-1, is 6000A at 400VAC. As circuit-breaker, its breaking capacity, according to IEC/EN 60947-2, is 20kA at 230VAC and 10kA at 400VAC. This miniature circuit breaker protects circuits against short circuit and overload currents. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. It becomes IP40 once in modular enclosure with insulation class II. its fast closing mechanism improves its service life. Its limitation class 3 (according to EN/IEC60898-1) improves downstream circuit protection cost. Its unique Visitrip indicator reduces intervention time by showing the faulty circuit. Its Visisafe green strip guarantees the physical opening of the contacts to allow downstream maintenance. This double terminal miniature circuit breaker reflects Schneider Electric expertise with more than 40 years developing modular devices for the protection of electrical circuits in all applications. It has a longer service life thanks to its high limitation and fast closing. This product is compliant with both IEC 60898-1 and IEC 60947-2, has IP20B finger proof terminals with double the tightening torque versus the standard and is DIN rail mountable. It offers VisiTripTM for safety during maintenance and VisiSafeTM to reduce intervention time.

TeSys D thermal overload relays - 48...65 A - class 10A

on-delay timing relay - 1 s..100 h - 24..240 V AC - 1 OC

socket RPZ - mixed contact - 16 A - < 250 V - screw clamp - for relay RPM3..

Zelio RM17 is a compact series of control relays which is easy to mount on a DIN-rail.The relays are available for either 1 phase or 3 phase applications and are able to measure the voltage, current, phase-loss, phase-sequence and asymmetry between phases

power base - TeSys U - 12 A - 24 V DC screw clamps control

TeSys GV2-Circuit breaker-thermal-magnetic - 0.40...0.63 A - screw clamp terminals

terminal shrouds - Mini-VARIO and VARIO - 3 poles - for V3 / V4

TeSys GV2 - Circuit breaker - thermal-magnetic - 6...10 A - spring terminals

TeSys D thermal overload relays - 16...24 A - class 10A