Säkerhet - sita 5

The ESMI 2251CTLE-W plug-in fire detector combines 4 separate sensing elements to act as a single unit. CO sensing for monitoring CO products from a smouldering fire, IR sensing for measuring ambient light levels and flame signatures, optical smoke detection and heat detection.

Cover/Lid for Intellia Manual Call Point EPP-20A

Electric Strike Power supply: 24V DCCurrent: 130mA.Resistance: 170,0 .Normally closed.

• +/- input automatic configuration• Programmable on spot (DIP): Pulse extension, alarm time limitation, arming delay, pulse generator and pulse delay• Time from 0.3 to 360 seconds• Suitable for time delay to doors, safes and other similar tasks

Key Box for surface mounting with feedback.Fitted with 10 x 100 mm plugs.Key Box dimensions (HxWxD): 126 x 92 x 69 mm.Drawer dimensions (HxWxD): 48 x 62 x 66 mm.Authorised:Combi box was developed on the basis of our users and their feedback. A box with a focus on:Ease & DesignMounting & RestorationVandalism & AttacksTherefore, as the Combi light of day, produced and made in 6mm tempered steel with room for both admission and key bundles. In addition to the box one-hand operated, which is essential in situations Hand 2 is employed (mobile phone, folders and papers, medicine etc.).

Uvex 9790212 Skyddshjälm Svart

Skyddsglasögon, klar lins, polykarbonat, termoplastisk polyuretan (TPU), polybutylene terephthalate, svart ram, blå ram, PPE-kategori II

Skyddsglasögon, solskydd: UV 400 2C-1.2 W 1 FT CE, klar lins, svart, blå

Uvex 2112022 Hörselskydd med hörlur

Skyddsglasögon, klar lins, polykarbonat, polyamid, TPE (termaplastisk elastomer), brass, nickel plated, klar, svart ram, PPE-kategori II

Esmi chart cabinet FDP - A4. Label: Esmi fire detection panels - range of product: Esmi fire detection panels - product or component type: chart cabinet - Range Presentation: Fire safety systems are a critical part of any business. Schneider Electric offer intelligent, innovative fire detection products that are user-friendly, modular, flexible, scalable and highly reliable.Esmi fire detection system grows easily with the site because of its modularity. Fire protection needs vary according to the level of protection desired, the use and purpose of the area covered, insurance company recommendations, the regulations imposed by fire and rescue officials, and the individual demands of the property owner. All Schneider Electric’s panels are CPR certified and comply with European standards EN54-2 and EN54-4. - Range Benefits: - cost-effective solutions - detectors for every need - simplified security operations - all-round service concept - easy installation - modularity - Online

- High-value modern optics – suitable for public access areas- Plain text LCD- Available for 2, 4 or 8 detector zones for up to 64, 128 or 256 detectors- Optional use of EOL module (EN 54-13 requirement)- Strong 3 A power supply

Intellia Loop Powered 100dB SounderNo Isolator

Addressable integrated siren base with isolator. Powered by the loop. Consumes only 5 mA. Can synchronize with other sounders on the loop. Two sound levels: 55-75 / 75-91 dB addressed with dil switch.

MCP5 manual call points are used in the FX fire detection system. The MPS5 call point is compatible with the SLC loop interface board. The MCP5 call point is designed for indoor use and it is fully approved to the latest EN54-11 standard.

The DP721RTA is a multi-sensor detector (optical enhanced by heat) with field exchangeable optical chamber and local relay output facilities. This detector will automatically reset when the fire alarm condition has been removed. 700 Series detectors continually monitor their own sensitivity and operational status. Once a day they perform a full diagnostic test that includes dynamically testing the sensing chamber and internal electronics.

Standard base for all AP200 White detectorsHight 20 mm. , Ø=102 mm. IP 20.

This model is with spring return

With changeover switch Incl. mounting baseNO & NC, 30VDC, Max 2AIP24Danish text on the front and glass. Complies with EN54-11.

Primer/paintFor touching up and repairing powder-coated andwet-painted surfaces, air-drying.

Waterproof box with DIN rail and 3 PG cable nuts

Series 65 Optical Smoke Detector Series 65 incorporates a pulsating LED located inside the detector housing. It is identical to the ionization detector, but has an indicator LED, which is visible in the resting state, but generates a red light alarm. It is doing well in slow burning and smoldering fires. Suitable for bedrooms and escape routes. Unaffected by wind or atmospheric pressure Flashing LED and magnet operated test switch option

The relay base incorporates a single-pole voltage-free changeover contact for switching ancillary equipment. The maximum contact rating is 30V 1A.When the detector changes to the alarm state, the relay is energised, causing the contact to change state. The contact will remain in this condition until the detector is reset.

GJD511 D-TECT Laser Bracket: - Mounting bracket required when fitting the D-TECT Laser to a structure or post.