The crystal clear Easy Slide tempered glass from Ringke perfectly renders the displayed colors and does not affect the sensitivity of the touch.
Made of recycled and reinforced tempered glass. The high degree of hardness (9H) makes Easy Slide scratch-resistant even in contact with sharp objects (knife or keys).

The glass is covered with a special oleophobic coating, thanks to which the aspect of leaving fingerprints or other contaminants on the surface of the glass is minimized.

Easy Slide is dedicated in particular to protecting the screen from scratches as well as impacts resulting from an unexpected fall of the phone.

Additionally, to ensure easy installation, the Easy Slide installation tool is included to make glass application simpler and more precise.

* Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

ASSEMBLY INSTRUCTIONS:
1. Start the installation in the bathroom right after bathing – the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles by swiping your finger in a circular motion.

Done! Enjoy a perfectly applied screen protector.

High-quality Ringke Easy Slide tempered glass with a protective filter function is an ideal way to protect the screen from damage and also limit its visibility to outsiders. The polarizing filter limits the visibility of the screen at an angle of 28° and completely reduces it at an angle of 40°.

The glass has a hardness of 9H, which is sufficient to effectively protect the screen, with high resistance of the glass itself to superficial scratches. It is also covered with an oleophobic layer, which reduces the degree of fingerprints leaving on the screen.

Additionally, to ensure easy installation, the Easy Slide installation tool is included to make glass application simpler and more precise.

Trust the Ringke brand and its excellent quality!

* The glass is cut only to the flat part with an emphasized structure, in accordance with and on the basis of the die prepared by the manufacturer of a given phone model.
** Due to the variety of milling, a slight halo of air may form around the screen after installing the protective glass on the screen. This is a natural situation and depends on the device itself.

Ringke Camera Frame Protector is a set of single covers for all lenses of your smartphone's camera. Each of them receives its own tempered glass enclosed in an aluminum frame, which effectively protects against scratches and mechanical damage. Precise workmanship makes the installation of each cover quick and trouble-free, and a special mounting cap facilitates perfect positioning.

A specialized black print on the edges prevents reflections from flash or sunlight. The overlays are glued on the sides of each element, so they do not negatively affect the quality of the photos. The top of each of the lenses is covered with a special oleophobic coating, which does not leave fingerprints and is very easy to clean. Tempered glass with a hardness class of 9H effectively protects against scratches.

Despite the many layers, the covers remain low in thickness and do not protrude significantly above the camera housing. Thanks to their compact design, the overlays work with most cases with wide camera cutouts.

The Ringke Camera Frame is a high-quality protective camera cover designed to provide maximum protection for your smartphone lenses without affecting the quality of your photos. Each cover is made of durable aluminum and tempered glass with a hardness of 9H, which effectively protects the camera from scratches, bumps and dust.

The slim design makes the product fully compatible with most cases and does not make the phone thicker. The covers are equipped with an anti-reflective and oleophobic coating, which minimizes light reflections and prevents fingerprints.

Ringke Easy Slide tempered glass is a precise screen protector. Included is the innovative Easy Slide mounting frame, which makes glass application simpler and more accurate than ever. The crystal-clear surface does not affect the colors displayed by the screen or the sensitivity of the touch.

The glass is made of reinforced material with a hardness of 9H, which effectively protects the screen of your smartphone from scratches in contact with keys, coins or other sharp objects. With a thickness of just 0.35 mm, the protection remains almost invisible and does not affect the slim silhouette of the phone. The rugged design absorbs impact energy in unexpected drops, protecting the display from cracks.

The oleophobic coating used minimizes fingerprints and other contaminants remaining on the glass surface. This keeps the screen clean for longer and makes everyday use more enjoyable. The wide Case Friendly cutout ensures full compatibility with most cases available on the market and all Ringke cases.

Crystal clear protective film covering the entire surface of the screen. It is made of high-quality urethane polycarbonate and has scratch resistance, which effectively protects the screen from damage. The film perfectly renders the displayed colors and has a special anti-grease coating that protects the screen from leaving fingerprints.

Its additional advantage is the ability to match most cases available on the market - no more problem with choosing a case for the screen protector used!
Installation of the film is extremely easy and accessible to every user, as the film has been designed in such a way that it does not leave air bubbles after application.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the shell as evenly as you can.

The Ringke Holder & Puffer Hand Strap is a versatile hand strap with the Holder Link system that combines convenience with practical solutions. The soft, quilted soft fabric finish provides comfort when wearing the phone for long periods of time, making it ideal for everyday use, travel, hiking or outdoor activities.

The Holder Link system made of durable, tear-resistant Oxford fabric guarantees a reliable attachment to most cases and phones. The set includes an adapter that allows you to mount it even in cases where the case does not have dedicated holes for a lanyard. Sturdy zinc alloy metal fasteners ensure a secure connection and long life for accessories.

The strap is designed for maximum functionality – the phone always stays at hand, allowing you to quickly access the device without the risk of dropping. The versatile design makes the strap work with most smartphone sizes and case types, offering a versatile solution for every user.

The crystal clear Easy Slide tempered glass from Ringke perfectly renders the displayed colors and does not affect the sensitivity of the touch.
Made of recycled and reinforced tempered glass. The high degree of hardness (9H) makes Easy Slide scratch-resistant even in contact with sharp objects (knife or keys).

The glass is covered with a special oleophobic coating, thanks to which the aspect of leaving fingerprints or other contaminants on the surface of the glass is minimized.

Easy Slide is dedicated in particular to protecting the screen from scratches as well as impacts resulting from an unexpected fall of the phone.

Additionally, to ensure easy installation, the Easy Slide installation tool is included to make glass application simpler and more precise.

* The glass has the widest possible Case Friendly die-cut, which means it will be compatible with most cases on the market and with any Ringke case.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

ASSEMBLY INSTRUCTIONS:
1. Start the installation in the bathroom right after bathing – the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles by swiping your finger in a circular motion.

Done! Enjoy a perfectly applied screen protector.

The crystal clear Easy Slide tempered glass from Ringke perfectly renders the displayed colors and does not affect the sensitivity of the touch.
Made of recycled and reinforced tempered glass. The high degree of hardness (9H) makes Easy Slide scratch-resistant even in contact with sharp objects (knife or keys).

The glass is covered with a special oleophobic coating, thanks to which the aspect of leaving fingerprints or other contaminants on the surface of the glass is minimized.

Easy Slide is dedicated in particular to protecting the screen from scratches as well as impacts resulting from an unexpected fall of the phone.

Additionally, to ensure easy installation, the Easy Slide installation tool is included to make glass application simpler and more precise.

* The glass has the widest possible Case Friendly die-cut, which means it will be compatible with most cases on the market and with any Ringke case.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

ASSEMBLY INSTRUCTIONS:
1. Start the installation in the bathroom right after bathing – the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles by swiping your finger in a circular motion.

Done! Enjoy a perfectly applied screen protector.

The Ringke Lanyard Strap Crossbody is a durable neck and shoulder lanyard that allows you to carry your phone comfortably and securely – without having to hold it in your hand. Made of strong nylon, it combines durability with everyday comfort of use, working well both during activities and on the go or in the city.

The unique fastening system is based on a sturdy base, impact-resistant polycarbonate, which is interchangeable with other straps in the Ringke series – you can change the style as you like while keeping the same fastening.

The adjustable length from 43 to 79 cm makes the leash fit every person – regardless of height, age or wearing preferences. Nylon fabric with a characteristic pattern and an orange Ringke accent gives the lanyard a distinctive, streetwear character.

The Ringke Lanyard Strap Crossbody is a practical and stylish accessory for people who value the comfort of carrying their phone and free hands on a daily basis.

The stylish Ringke Onyx Magnetic case is made of durable, yet soft, scratch-resistant thermoplastic polyurethane. It fits snugly, and the non-slip surface and rough sides make it sit firmly in the hand. Innovative corners protect the case and the device from damage and scratches at the same time.

The special matte granular surface is non-slip and protects against fingerprints. The magsafe charging compatible case speeds up the charging process as well as the comfort of use. The cover features a notch for the charging port and LED, offering full access to interfaces and providing the ultimate user experience.

The set includes a functional carabiner, allowing you to hang the cover anywhere, e.g. on the belt of your trousers, backpack or purse, protecting the headphones from loss. The case is compatible with MagSafe accessories, allowing you to use MagSafe magnetic chargers, mounts, and other accessories.

*We recommend using the included double-sided adhesive tape when assembling the case

Ringke Onyx Magsafe is a flexible case made of durable thermoplastic TPU polyurethane with a built-in magnetic ring for full compatibility with MagSafe accessories. The original, rough texture covering the entire surface is a response to smooth cases prone to scratches and fingerprints. The textured surface hides any scratches and stains, while ensuring a more secure grip in the hand. The elastic material makes it easy to put on and take off the case from your phone.

A built-in magnetic ring allows for wireless charging and a stable connection to MagSafe chargers, mounts, and wallets without having to be removed. The magnets hold firmly on the accessories, ensuring a secure hold in any situation. The case effectively protects the device from the effects of falls thanks to the Military Grade certificate, which means that it has passed a number of endurance tests. The design absorbs shocks and protects the phone from mechanical damage.

Raised edges around the screen and camera island protect the display and lenses from scratches when placing the phone on flat surfaces. The case provides easy access to all interfaces thanks to precise cutouts for ports and integrated button covers. The rough sides make the phone sit securely in your hand, minimizing the risk of accidental slipping. Special cutouts allow you to mount a lanyard or keychain.

Ringke Silicone MagSafe is a slim and durable case with a hybrid design. The three-layer structure combines a soft silicone outer shell with a reinforcing PC frame on the inside, finished with soft microfiber to protect the back of the phone from scratches. The material fits perfectly into the shape of the device, providing full access to all ports and buttons. The silicone surface is pleasant to the touch and guarantees a firm grip, minimizing the risk of the phone slipping out of your hand during daily use.

The built-in magnetic ring ensures full compatibility with MagSafe accessories, allowing you to charge wirelessly without having to remove the case. The magnets hold on to MagSafe accessories, ensuring a stable connection to chargers, holders or magnetic wallets. Gently raised edges around the screen and camera islands protect against scratches when placing the phone on flat surfaces.

The case has integrated covers for buttons and precise cutouts for ports, offering full access to interfaces and the highest comfort of use. The slim design does not significantly increase the dimensions of the phone, while maintaining its elegant appearance. The durable silicone material guarantees long-lasting protection and a pleasant experience in contact with the case.

High-quality Ringke Easy Slide tempered glass with a protective filter function is an ideal way to protect the screen from damage and also limit its visibility to outsiders. The polarizing filter limits the visibility of the screen at an angle of 28° and completely reduces it at an angle of 40°.

The glass has a hardness of 9H, which is sufficient to effectively protect the screen, with high resistance of the glass itself to superficial scratches. It is also covered with an oleophobic layer, which reduces the degree of fingerprints leaving on the screen.

Additionally, to ensure easy installation, the Easy Slide installation tool is included to make glass application simpler and more precise.

Trust the Ringke brand and its excellent quality!

* The glass is cut only to the flat part with an emphasized structure, in accordance with and on the basis of the die prepared by the manufacturer of a given phone model.
** Due to the variety of milling, a slight halo of air may form around the screen after installing the protective glass on the screen. This is a natural situation and depends on the device itself.

ASSEMBLY INSTRUCTIONS:

1. Start installation in the bathroom right after bathing – water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles by swiping your finger in a circular motion.Done! Enjoy a perfectly applied screen protector.

Ringke Silicone MagSafe is a slim and durable case with a hybrid design. The three-layer structure combines a soft silicone outer shell with a reinforcing PC frame on the inside, finished with soft microfiber to protect the back of the phone from scratches. The material fits perfectly into the shape of the device, providing full access to all ports and buttons. The silicone surface is pleasant to the touch and guarantees a firm grip, minimizing the risk of the phone slipping out of your hand during daily use.

The built-in magnetic ring ensures full compatibility with MagSafe accessories, allowing you to charge wirelessly without having to remove the case. The magnets hold on to MagSafe accessories, ensuring a stable connection to chargers, holders or magnetic wallets. Gently raised edges around the screen and camera islands protect against scratches when placing the phone on flat surfaces.

The case has integrated covers for buttons and precise cutouts for ports, offering full access to interfaces and the highest comfort of use. The slim design does not significantly increase the dimensions of the phone, while maintaining its elegant appearance. The durable silicone material guarantees long-lasting protection and a pleasant experience in contact with the case.

Ringke Easy Slide tempered glass is a precise screen protector. Included is the innovative Easy Slide mounting frame, which makes glass application simpler and more accurate than ever. The crystal-clear surface does not affect the colors displayed by the screen or the sensitivity of the touch.

The glass is made of reinforced material with a hardness of 9H, which effectively protects the screen of your smartphone from scratches in contact with keys, coins or other sharp objects. With a thickness of just 0.35 mm, the protection remains almost invisible and does not affect the slim silhouette of the phone. The rugged design absorbs impact energy in unexpected drops, protecting the display from cracks.

The oleophobic coating used minimizes fingerprints and other contaminants remaining on the glass surface. This keeps the screen clean for longer and makes everyday use more enjoyable. The wide Case Friendly cutout ensures full compatibility with most cases available on the market and all Ringke cases.

Ringke Onyx is a flexible case made of durable thermoplastic TPU polyurethane that combines effective protection with a distinctive design. The original, rough texture covering the entire surface is a response to smooth cases prone to scratches and fingerprints. The textured surface hides any scratches and stains, while ensuring a more secure grip in the hand. The elastic material makes it easy to put on and take off the case from your phone.

The case effectively protects the device from the effects of falls thanks to the Military Grade certificate, which means that it has passed a number of endurance tests. The design absorbs shocks and protects the phone from mechanical damage. Raised edges around the screen and camera island protect the display and lenses from scratches when placing the phone on flat surfaces.

The case provides easy access to all interfaces thanks to precise cutouts for ports and integrated button covers. The rough sides make the phone sit securely in your hand, minimizing the risk of accidental slipping. Special cutouts allow you to mount a lanyard or keychain.

Crystal clear Ringke Dual Easy protective film covering the entire surface of the screen. It is made of high-quality urethane polycarbonate and has a scratch resistance of 3H, which effectively protects the screen from damage. The film perfectly renders the displayed colors and has a special anti-grease coating that protects the screen from leaving fingerprints.

Its additional advantage is the ability to match most cases available on the market - no more problem with choosing a case for the screen protector used!
Installation of the film is extremely easy and accessible to every user, as the film has been designed in such a way that it does not leave air bubbles after application.

The crystal clear Easy Slide tempered glass from Ringke perfectly renders the displayed colors and does not affect the sensitivity of the touch.
Made of recycled and reinforced tempered glass. The high degree of hardness (9H) makes Easy Slide scratch-resistant even in contact with sharp objects (knife or keys).

The glass is covered with a special oleophobic coating, thanks to which the aspect of leaving fingerprints or other contaminants on the surface of the glass is minimized.

Easy Slide is dedicated in particular to protecting the screen from scratches as well as impacts resulting from an unexpected fall of the phone.

Additionally, to ensure easy installation, the Easy Slide installation tool is included to make glass application simpler and more precise.

* The glass has the widest possible Case Friendly die-cut, which means it will be compatible with most cases on the market and with any Ringke case.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

ASSEMBLY INSTRUCTIONS:
1. Start the installation in the bathroom right after bathing – the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles by swiping your finger in a circular motion.

Done! Enjoy a perfectly applied screen protector.

A unique Ringke Fusion X case, the undoubted advantage of which is its small size in relation to the protection offered.

Made of flexible polycarbonate, additionally reinforced with shock-absorbing TPU plastic. The whole thing perfectly eliminates any falls and protects against scratches, and also does not significantly affect the appearance by revealing the back panel of the phone. The case has taken on the character of an armored case, as it differs from the basic version with corner extensions, which strengthens and protects these sensitive parts of the phone. Thanks to the added special embossing on the edges, the phone in the case fits much more securely in the hand. Recommended especially for everyday practical protection of the device.

The Fusion X has been subjected to fitness tests and has received MIL STD 810G-516.6 certification, which means that it has fallen 26 times from a height of 2 meters.

All Ringke products are tested for abrasion resistance and a precise fit to deliver a high-quality case.

Ringke Silicone MagSafe is a slim and durable case with a hybrid design. The three-layer structure combines a soft silicone outer shell with a reinforcing PC frame on the inside, finished with soft microfiber to protect the back of the phone from scratches. The material fits perfectly into the shape of the device, providing full access to all ports and buttons. The silicone surface is pleasant to the touch and guarantees a firm grip, minimizing the risk of the phone slipping out of your hand during daily use.

The built-in magnetic ring ensures full compatibility with MagSafe accessories, allowing you to charge wirelessly without having to remove the case. The magnets hold on to MagSafe accessories, ensuring a stable connection to chargers, holders or magnetic wallets. Gently raised edges around the screen and camera islands protect against scratches when placing the phone on flat surfaces.

The case has integrated covers for buttons and precise cutouts for ports, offering full access to interfaces and the highest comfort of use. The slim design does not significantly increase the dimensions of the phone, while maintaining its elegant appearance. The durable silicone material guarantees long-lasting protection and a pleasant experience in contact with the case.

Ringke Silicone MagSafe is a slim and durable case with a hybrid design. The three-layer structure combines a soft silicone outer shell with a reinforcing PC frame on the inside, finished with soft microfiber to protect the back of the phone from scratches. The material fits perfectly into the shape of the device, providing full access to all ports and buttons. The silicone surface is pleasant to the touch and guarantees a firm grip, minimizing the risk of the phone slipping out of your hand during daily use.

The built-in magnetic ring ensures full compatibility with MagSafe accessories, allowing you to charge wirelessly without having to remove the case. The magnets hold on to MagSafe accessories, ensuring a stable connection to chargers, holders or magnetic wallets. Gently raised edges around the screen and camera islands protect against scratches when placing the phone on flat surfaces.

The case has integrated covers for buttons and precise cutouts for ports, offering full access to interfaces and the highest comfort of use. The slim design does not significantly increase the dimensions of the phone, while maintaining its elegant appearance. The durable silicone material guarantees long-lasting protection and a pleasant experience in contact with the case.

Ringke Easy Slide Privacy is a premium tempered glass with an advanced privacy filter. A special privatization layer blocks the field of view of people looking from the side, so that the content displayed on the screen is visible only to you. The screen remains clear and legible when viewed directly, but darkens when viewed from the side. This is ideal for bus travel, working in a café or in any public place.

The glass is made of reinforced material with a hardness of 9H, which effectively protects the screen of your smartphone from scratches in contact with keys, coins or other sharp objects. With a thickness of just 0.35 mm, the protection remains almost invisible and does not affect the slim silhouette of the phone. The rugged design absorbs impact energy in unexpected drops, protecting the display from cracks. The oleophobic coating used minimizes fingerprints and other contaminants remaining on the glass surface.

Included is a dedicated Easy Slide installation tool that makes glass application simpler and more precise. The wide Case Friendly cutout ensures full compatibility with most cases on the market. The smooth 2.5D edges perfectly match the device's display, maintaining high touch sensitivity.

Ringke Easy Slide Privacy is a premium tempered glass with an advanced privacy filter. A special privatization layer blocks the field of view of people looking from the side, so that the content displayed on the screen is visible only to you. The screen remains clear and legible when viewed directly, but darkens when viewed from the side. This is ideal for bus travel, working in a café or in any public place.

The glass is made of reinforced material with a hardness of 9H, which effectively protects the screen of your smartphone from scratches in contact with keys, coins or other sharp objects. With a thickness of just 0.35 mm, the protection remains almost invisible and does not affect the slim silhouette of the phone. The rugged design absorbs impact energy in unexpected drops, protecting the display from cracks. The oleophobic coating used minimizes fingerprints and other contaminants remaining on the glass surface.

Included is a dedicated Easy Slide installation tool that makes glass application simpler and more precise. The wide Case Friendly cutout ensures full compatibility with most cases on the market. The smooth 2.5D edges perfectly match the device's display, maintaining high touch sensitivity.

The Ringke Fusion X Magnetic MagSafe is a rugged hybrid case that combines maximum protection with MagSafe functionality. Made of two layers - flexible thermopolyurethane (TPU) and hard polycarbonate (PC) - it provides effective protection against falls and damage. A built-in magnetic ring allows you to securely attach your MagSafe accessories and fast wireless charging. The black frame contrasts with the transparent back, creating a sporty look and emphasizing the phone's original design.

The case is Mil-Grade military certified, which confirms its durability. Shock Absorption technology in the corners absorbs shocks and shocks, protecting your phone in the most vulnerable points. Raised edges around the screen and camera protect these sensitive components from contact with flat surfaces. The magnets ensure full compatibility with the entire MagSafe accessory ecosystem.

Precise cutouts allow you to freely access all the functions of the phone. Integrated button covers made with ActiveTouch technology guarantee full responsiveness without sacrificing sensitivity. The one-piece design makes assembly and disassembly simple and quick. The case retains full MagSafe wireless charging functionality without having to remove the case.