Danfoss Radiatorer och ventiler - sita 2

The Danfoss Dynamic Valve is an innovative two-in-one radiator valve. It combines a thermostatic radiator valve for accurate temperature control with an automatic adjustment valve – all in the same valve. The built-in pressure difference regulator eliminates the pressure fluctuations in a 2-string heating system. The preset scale with 1-7+N is used to limit the maximum flow between 25-135 l/h. By using Dynamic Valve, a perfectly controlled and regulated heating system is achieved.

Danfoss 013G7718 rörmokeritillbehör

Return coupling with shut-off and drain, valve body, type RLV DN 15, straight running. The return coupling type RLV makes it possible to shut off each individual radiator, e.g. for maintenance or repair, without affecting the other radiators in the system.

Danfoss radiator valves with pre-setting are used in two-pipe water based heating systems to ensure optimum distribution of the water in a heating system

Valves with pre-setting are used in water-borne two-line systems to ensure optimal distribution of the water in the heating system. Pre-set.

Angular valve housings type RA-G are intended for two-line systems with circulation or for single-line systems with a pump.

Nipple bend for radiator screw connection (nickel-plated) 1/2", Nipple bend 90°.

Danfoss Aveo Institutional sensor element with built-in sensor. Setting range 7-28°C, Frost protection.

Danfoss compression fittings. Compression fittings for connecting Danfoss valves with steel and copper tubings.

Return coupling with shut-off and drain, valve body, type RLV DN 10, angled. The return coupling type RLV makes it possible to shut off each individual radiator, e.g. for maintenance or repair, without affecting the other radiators in connection.

Danfoss adaptor RA. Adapter for mounting living eco and living connect on RA valves.

Danfoss Aveo Service thermostat with built-in sensor. Setting range 7-28°C, Frost protection, Service gland.

Valve housing type RLV Press incl. self-sealing nipples. DN15.

Return thermostat for automatic regulation of the return water temperature from hot water tanks that are directly connected to the district heating system.

Danfoss Dynamic Valve™ is an innovative two-in-one radiator valve.

Danfoss radiator valves with pre-setting are used in two-pipe water based heating systems to ensure optimum distribution of the water in a heating system

Valves with pre-setting are used in water-borne two-line systems to ensure optimal distribution of the water in the heating system. The preset makes it possible to precisely set the calculated water flow. The preset is done without the use of tools. The RA-N has a red cover cap and the RA-U has a yellow cover cap. RA-U valves are mainly intended for heating systems with small flow volumes through the radiator. RA-UR valves are primarily intended for replacing existing FJVR valves on district heating systems.

The Danfoss Dynamic Valve is an innovative two-in-one radiator valve. It combines a thermostatic radiator valve for accurate temperature control with an automatic adjustment valve – all in the same valve. The built-in pressure difference regulator eliminates the pressure fluctuations in a 2-string heating system. The preset scale with 1-7+N is used to limit the maximum flow between 25-135 l/h. By using Dynamic Valve, a perfectly controlled and regulated heating system is achieved.

RA-K + RA-KE middle tube 15x650 mm

Angular valve housings type RA-G are intended for two-line systems with circulation or for single-line systems with a pump.

Danfoss Aveo Institutional sensor element with remote sensor, 2m capillary tube. Setting range 7-26°C, Frost protection.

Danfoss ReactTM Sensors, Standard, Liquid, Sensor type: Remote Sensor, 8-28°C, RA

Danfoss radiator valves with pre-setting are used in two-pipe water based heating systems to ensure optimum distribution of the water in a heating system

Return coupling with shut-off and draining, valve body, type RLV DN 10, continuous. The return coupling type RLV makes it possible to shut off each individual radiator, e.g. for maintenance or repair, without affecting the other radiators in the system.