Mobiltelefontillbehör-Skyddsfilm - sita 113

3MK FlexibleGlass 1 styck

3MK ARC+ 1 styck

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may form around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

3MK FlexibleGlass 1 styck

3MK ARC+ Genomskinligt skärmskydd Honor 1 styck

3MK 1UP 3 styck

3MK 5903108589062 skärm- och baksidesskydd till mobiltelefon Genomskinligt skärmskydd Apple 1 styck

Skärmskydd för mobiltelefon, anti-chock, film, för Apple iPhone 13, 13 Pro

3MK FlexibleGlass 1 styck

Skärmskydd för mobiltelefon, glas, ramfärg svart, för Apple iPhone 15, 16

Skärmskyddet ger kristallklart skydd i härdat glas för Asus Rog Ally 7" med 9H hårdhet, anti-smutsbeläggning och helskärmslim i en slimmad 0.33 mm-design.

DELTACO GAMING Screen protector for Asus Rog Ally 7", scratch resistant, 0.33 mm hjälper till att hålla din handhållna skärm levande och skarp samtidigt som det ger stöt- och reptålighet, med medföljande installations tillbehör för en enkel, bubbel fri applicering.

• 9H hårdhet härdat glas
• Kristallklart, ultraklart utförande
• Anti-smutsbeläggning för att minimera fingeravtryck
• Helskärmslim
• Stöt- och reptåligt
• 0.33 mm tjocklek
• Kompatibel med Asus Rog Ally 7" och Rog Xbox Ally 7"

Perfekt för att behålla en ren, klar skärmkänsla samtidigt som du skyddar dagligt använd gaminghårdvara.

• Dubbelt förstärkt härdat glas
• Klarar stålkulprov vid fallhöjd upp till 6 ft / 1,8 m
• Mot fingeravtryck
• Exakt beröring
• Exakt passform
• Ultraklar högupplösning
• Applicator och rengöringskit ingår
• Designad för att vara kompatibel med UAG-skal
• Återvinningsbar, plastfri eko-förpackning

Skärmskydd för mobiltelefon, glas, klar, för Samsung Galaxy A26

Skärmskydd för mobiltelefon, glas, för Samsung Galaxy S24+, S25+

Skärmskydd för mobiltelefon, glas, för Apple iPhone 15 Pro

Kameralins-skyddsglas CRONG Lens Shield skyddar kamera och lins på iPhone 15 och iPhone 15 Plus.

Lens Shield är utformat av CRONG och är ett dedikerat telefontillbehör för skydd som säkrar din iPhones kameraområde samtidigt som linsen täcks med glas.

• Kompatibel med iPhone 15
• Kompatibel med iPhone 15 Plus
• Glasskydd för kamera och lins
• Modell: CRG-LSIP15

Hjälper till att hålla din iPhone-kamera skyddad för tydligare användning i vardagen.

Skärmskydd för surfplatta, glas, transparent, för Apple 10.2-inch iPad (7:e generation, 8:e generation, 9:e generation)

Skärmskydd för mobiltelefon, propack, glas, klar, för Google Pixel 10a

Just Mobile Xkin™ 3D Härdat Glas för iPhone XR erbjuder kant-till-kant-skydd med enastående 9H-hårdhet. Denna supertunna skärmskydd ger HD-klarhet, silkeslen känslig touch och motstånd mot olja, vatten och fingeravtryck. Designad med rundade kanter för komfort och exakta utskärningar för sensorer.



Bulkförpackad utan detaljförpackning.

Skärmskydd för mobiltelefon, glas, med sekretessfilter, 2-vägs, klar, för Samsung Galaxy S26

3MK SilverProtection+ 1 styck

3MK HardGlass Max 1 styck

Tech-Protect Easy Set+ is a comprehensive protective kit that protects the screen and lens of the device. The tempered display coating made of lightweight, milled glass with a hardness of 9H provides maximum protection against scratches and cracks.

Crystal clear glass guarantees image clarity, perfect reproduction of color saturation and does not disturb touch sensitivity. Additionally, they are covered with a high-quality oleophobic coating that minimizes the amount of fingerprints and other contaminants left behind. Protective lens cap made of tempered glass with 9H hardness, precisely cut, provides protection against scratches and cracks.

Installation accessories are included in the set, along with the Easy Set+ positioning frame, which makes installation simple and affordable for every user. The frame guarantees perfect positioning of the glass on the screen, eliminating the risk of crooked mounting.

Tech-Protect Easy Set+, i.e. the tempered coating for the display, is made of light and milled glass with a thickness of 0.3mm and a hardness of 9H. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left.

Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage.

The set includes installation accessories along with a positioning frame, thanks to which installation is very easy and accessible to literally everyone.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the shell as evenly as you can - you can position it with the help of the positioning frame from the kit.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

The Tech-Protect Quick Set Spy+ 2-Pack Privacy Glass is an innovative solution for maximum privacy protection during use. A special filtering technology ensures that the screen content is visible only to the user looking directly at the display, while those watching from the side see only the black screen.

The glass combines two key functions - privacy protection and full protection of the display against scratches, cracks and impacts. Made of tempered glass with a highest hardness of 9H, it provides excellent image quality without affecting the responsiveness of the touch screen.

The kit includes two protective lenses and a special installation frame that guarantees perfect positioning and application of the glass without air bubbles. This comprehensive installation system eliminates the common problems associated with tempered glass application, ensuring a professional result the first time.

Ideal for people working with sensitive data, traveling by public transport or simply valuing their privacy in public places.

* Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the shell as evenly as you can - you can position it with the help of the positioning frame from the kit.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.