Lampor - sita 116

FABESSA HÄNGSMYCKE Ø400 GRÅ

CASILDA UTOMHUS VÄGGSENSOR 660LM IP44 VIT

SOLPANEL BORDSLAMPA SILVER/VIT

MAIDENHEAD HÄNGSMYCKE SVART

COMBWICH HÄNGE Ø:530 SVART/CREME

EGLO GRATTINO black loft lamp GU10 incl. 5X3W Ø:350

• Typ: Vägglampor
• Material i höljet: galvaniserat stål
• Glas-/skärmmaterial: glas
• Produktsegment: utomhusbelysning
• Skyddsnivå: IP44
• Lamphållartyp: E27

This wall luminaire of the RIFORANO series from the outdoor collection is made of black structured powder-coated cast aluminium and white plastic. The two LED boards provide warm white light with 640 lumens. It has protection rating IP44.
The modern style luminaires of the RIFORANO series have two LED boards that shine through the inside plastic cover on the left and right. The luminaire family consists of wall luminaire with and without sensor, pedestal and floor luminaire.

• Typ: Vägglampor
• Material i höljet: gjuten aluminium
• Glas-/skärmmaterial: plast
• Produktsegment: utomhusbelysning
• Skyddsnivå: IP44
• Lamphållartyp: LED

SABALETE VÄGG SVART

PICCOLA table light , brushed brass

Surface Bulkhead Outdoor is a robust ceiling light with a beautiful and simple design. The luminaire is supplied with a round shade (half shade can be purchased as an accessory). The luminaire is available in both white and black. The simple and beautiful design means that the luminaire is ideal for use both indoors and outdoors. The luminaire housing is made of UV-resistant polycarbonate with an impact resistance of IK10. The luminaire is also IP65 classified. An additional advantage of Surface Bulkhead Outdoor is that it is very easy to install. It is possible to feed cables in from all sides of the luminaire and two cables from the back. Inside, the luminaire is equipped with spring-loaded loop-through terminals. The luminaire can be mounted directly on PL boxes and Euro boxes. The luminaire has Multi Select, which means both optional Kelvin (3000 and 4000K - Multi Color) and optional lumen (4 steps - Multi Lumen). High light output of up to 132 lm/W. It is part of our EVERLOOP concept, which makes it an environmentally responsible choice. EVERLOOP allows you to change the LED module and driver. The lifespan is 55,000 hours L80/B10.

Various accessories can be purchased such as: Half screen, driver and LED module.

There are 2 sizes to choose from (250mm/10W/1200 lumen, 300mm16W/2280 lumen) and several variants:

- Standard on/off (Multi Lumen, Multi Color)
- DALI (Multi Color)
- Sensor variant with HF sensor
- Emergency with built-in 3-hour back-up

TALAMELLO VÄGG Ø150 6W 750LM SVART

CAMARDA outdoor wall lamp, anthracite

Easy and Flexible Installation These SmartClips from HiluX are the ideal solution for quickly and easily reconnecting cut COB LED strips - now with a full 2 ​​meter cable! The extra length gives you far greater freedom to run the cables discreetly behind furniture, up walls or through ceilings, without the need for extra joints. This means fewer connections, less cable clutter and a more professional finish – perfect for DIY enthusiasts and professional installers alike. And the best part? No special tools required – just click the cord into place and you're good to go. Durable and Reliable Design SmartClips are made of durable material, suitable for both indoor and outdoor use. The robust construction ensures that your LED connections will last – even in demanding environments. Included in the package you get five clips, so you are well covered for both small and large projects. Make Your Lighting Smarter With two meters of cable per clip, you get maximum flexibility in the placement of your LED strips. It makes it easy to create indirect lighting, illuminate hard-to-reach areas or draw power to places where a short wire would not reach. Regardless of whether you want to emphasize details in the home, create coziness in the garden or illuminate a workstation, these clips give you the necessary freedom and security in installation. How to use SmartClips: Insert the LED strip Insert the cut end of the LED strip into the opening of the SmartClip. Make sure it is seated correctly and aligned with the contact points. Fasten with pliers Use pliers to gently press the conductors down into the clamp. It ensures a stable and durable connection without the risk of anything coming loose. Connect the power When the connection is made, connect the power. Check that the LED strip lights up correctly and then proceed with the rest of the installation. max 24V

Plug-and-play cable drives up to 100 m of LED strip directly from one 230 V socket Compatible with phase/triac wall dimmers - keep full, sliding light control Compact assembly 24 × 17 mm, IP20: end plug and 2 × 5 cm Ø20 mm shrink flex included Starter cable for HiluX HighPower SMD - incl. end plug (230 V) This dedicated starter cable makes the installation of HiluX HighPower SMD-LED strips a breeze: insert the plug into the wall, click the contact part on the strip, and immediately experience powerful light. It all comes as one pre-assembled kit with end cap so you can finish the opposite end elegantly and dust free. The cable is designed to supply up to 100 meters of LED strip without additional drivers or adapters. At the same time, it supports phase and triac dimming, so you retain the well-known stepless light control of traditional wall dimmers – ideal for showrooms, restaurants and larger residential projects. The robust assembly measures just 24 mm in width and 17 mm in height and fits perfectly with the HiluX HighPower SMD profile. Two pieces of crimp flex are included, so that all joints can be sealed quickly and safely. Note the IP20 rating: the starter cable is intended for dry, indoor environments such as living rooms, shops and offices.

Impact-resistant, UV-stable polycarbonate in a discreet 10 × 14 × 16 mm format Screw in, click the strip on – fast, vibration-free assembly 10 clips per package, enough for approx. 5 m HiluX HighPower SMD-strip Mounting clips for HiluX HighPower SMD – 10 pcs. Make your LED installation simple, neat and secure with these specially designed mounting clips for the HiluX HighPower SMD strip. The clips are cast in impact-resistant, UV-resistant polycarbonate, which retains its shape and grip even when exposed to heat from the LED lights for a long time. The compact size (10 mm high, 14 mm long and 16 mm wide) almost disappears visually, but firmly holds the strip in ceiling profiles, under cabinets and along moldings. Installation takes a few seconds: screw up the clip (screws not included), click the LED strip in - and the light sits tight without hanging. Each pack contains 10 clips, which is enough for about five meters of strip at normal spacing, so most projects can be done with one pack. A small detail that gives your HiluX HighPower lighting a professional and durable finish.

Wireless RF dimmer with timer, memory function and remote control (15 m range) Compact control box 90 × 70 × 28 mm drives up to 50 m 230 V HiluX LED-strip (Type X-2) IP20 for dry rooms - end plug and 2 × 5 cm Ø20 mm shrink-flex included (2 × AAA batteries not included) Remote-controlled RF timer + dimmer for HiluX HighPower LED-strip (230 V) Give your HiluX HighPower installation intelligent lighting control with this wireless RF device. The small control box connects directly to the 230 V mains and supplies flicker-free, dimmable light for up to 50 meters of LED strip, while the remote control lets you switch on, off and fine-tune the brightness from up to 15 meters away. A built-in memory circuit remembers the last setting, so you automatically return to the exact light level you left - even after a power cut. It provides both comfort and reliability in everything from living rooms and offices to showrooms and photo studios. The set is supplied complete with end plug and two pieces of Ø20 mm shrink flex, so that all joints are sealed quickly and professionally. The electronics are IP20 rated for dry indoor environments and the remote control uses 2 × AAA batteries (not included). Upgrade the lighting and discover how easy it is to create the perfect atmosphere with one click.

Outdoor Endura Style Solar Glow sensor. Product features: Solar powered outdoor LED luminaire. PIR motion detector and daylight sensor. Color temperature: 3,000 K (Warm White). Battery charging via solar panel. Product benefits: Easy and quick installation. Demand based lighting and energy saving thanks to motion and daylight sensor. High-quality materials. Areas of application: Outdoor use (IP44). Garages. Building facades. Safety advice: If the battery compartment (if applicable) does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.. Please avoid: Maximal ambient temperature: +35 °C. Replacement of a battery with an incorrect type that can defeat safeguard (for example, in the case of some lithium battery types). Altitude during operation: 2000 m. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion..

ECO TUBE-E ARMATUR L1285 1X18W IP65 GRÅ/TRANSP.

SIDERNO BADRUM L350 8.3W 900LM 4000K IP44 KROM

RINCINE UTOMHUSVÄGG 270LM 4000K MED SENSOR DIMMPB. IP44 SVART

POGGIOBELLO BOLL Ø200 RGB IP44 VIT W/FJÄRRKONTROLL B.

LUCIGNANO-KORT H235 USB-C OPL. RGB TOUCH TRANSP.