Komponenter för switchboxar och skåp - sita 60

Time switch, automatic day-light-saving time

Buzzer 220/240V 1M

RCBO 1P+N 6kA C-16A 30mA ATechnical data:Release curve: CPoles: 2 poles.Nominal load (in): 16 ARated Voltage (Un): 230V + 10% / -15%Rated output current (Idn): 30mASensitivity Class AFrequency: 50HzRated breakdown: 6kA in h.t. EN61009-1IP protection: IP2x mounted in enclosure.Temperature: 30 ° C in h.t. EN61009-1Pollution rate: 2 in h.t. EN61009-1

Schneider Electric LC1D95P7 tillsatskontakter

Siemens 3RT2017-2BB42 övrigt

2P 25A 30mA A class

Power supply 90-265VAC / 24VDC, 0,42A-10W

The B6-30-10 mini contactor is a compact 3 pole contactor with 1 auxiliary contact and screw terminals. They are ideally suited for applications where reliability is a must and space is at a premium. Mini contactors are used in residential buldings, commercial buildings and industrial applications for the control of single or three-phase loads up to 4 kW (AC-3) and 20 A / 690 V (AC-1) or switching of control signals. Further features are the silent coil, a switch position indication and the integrated possibility for rail or wall mounting.

This Acti9 electrical auxiliary is a modular OC and fault contact. The 2 contacts (2 NO/NC) can report the signalling information of the associated device to a programmable logic controller. The rated current (In) is from 2mA to 100mA with operating frequency of 50Hz to 60Hz at 24VAC to 240VAC, and from 2mA to 100mA at 24VDC to 220VDC. It has 2 position switches with contacts type 2 C/O. It is intended for new or renovated installation in small commercial, buildings, critical buildings, healthcare, industry, data center and infrastructures. This OC and fault contact is compatible with Acti9 ranges such as iC60, iID, iDPN ARC, iDPN Vigi, iDPN Vigi ARC, iSW, iC60 and iID double terminals residual current circuit breaker (RCCB). The OC and fault contact is installed for only Acti9 ranges such as iID, iDPN Vigi, iSW-NA, ARA, iC60 and RCA devices which includes 2 changeover contacts. If there is no comb busbar, it is also compatible with iC40, iC40 ARC, iCV40, iCV40 Vigi ARC. The iSD+OF is either used for device short name or compatibility code. The mechanical indicator is provided on the product for signalling (Local). It has a screw clamp terminal connection at top and bottom. The connection allows rigid copper cable. The cable cross section capacity is from 1mm2 to 4mm2. It has a screw clamp terminal connection at top and bottom. The connection allows flexible copper cable. The cable cross section capacity is from 0.5mm2 to 2.5mm2. It has a screw clamp terminal connection at top and bottom. The connection allows rigid copper cables (2 cables). The cable cross section capacity is 2.5mm2. It has a screw clamp terminal connection at top and bottom. The connection allows flexible with ferrule copper cables (2 cables). The cable cross section capacity is 1.5mm2. The rated insulation voltage (Ui) is up to 500V. It has a rated impulse withstand voltage (Uimp) of 4kV. The width in 9mm pitches is 1. The dimensions are (W) 9mm x (H) 90mm x (D) 73mm. The product colour is white

Siemens 7KT5807 elektriska tidtagarur

Siemens 3RH2122-1BB40 övrigt

Siemens 3RV2021-4FA10 övrigt

Zelio RSB are a series of compact plug-in relays with a width of only 16 mm.The relays are available with 1 C/O with either 12 and 16A or 2 C/O contacts with 8A maximum load.It is possible to insert a protection module (diode, varistor or RC-circuit) into the relay socket if needed.The sockets RSZE1S35M and RSZE1S48M has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RSB1A160P7PV is a complete plug-in relay mounted into a RSZE1S48M socket with a maintaining clamp, which secure that the relay stays in the socket even in an environment with vibrations.The socket has a varistor interserted for protection against voltage spikes generated by coils in the panel.The varistor module has also a build-in LED for indication of supply to the relay.RSB1A160P7PV has a 1 C/O AgNI contact with a maximum load of 16A.The relay has a lifetime of 100.000 cycles (depending on load).Supply voltage to the RSB1A160P7PV is 230 VAC and average coil co

Schneider Electric A9S65240 övrigt

Electricity meter, 3 phase, Active energy Cl. 1 & B, Approved according to: IEC 62052-11, IEC 62053-21, EN 50470-1, EN 50470-3

Plug-in relay 2co relay 15mm, 24v dc

Main switch, T0, 20 A, surface mounting, 2 contact unit(s), 3 pole + N, STOP function, With black rotary handle and locking ring, Lockable in the 0 (Off) position

Front operated rotary type installation switch. For standard 45 mm opening. Padlockable in OFF-position with one padlock (bail dia 5 mm)

PFI relay 63A 3P+N 30mA Type B

Zero separation piece 200A box 1 Product description:

Insta contactor with 1 make and 1 break contact contact for 230, 400 v ac, 20 a triggering 230 v ac

Siemens 5SV3344-4 strömbrytare 4P

HF3B 200/5A KL 0.5/1/3 1/2.5/3VA Current Transformer Product Description: HF3B 200/5A KL 0.5/1/3 1 /2.5 /3VA current transformer. IEC 61869-2, CE marked, Kema-Keur approved, UL94 V-0 rated. Application: display.

MCB 1P+N 6KA C-13A 1M

TeSys K contactor - 3P(3 NO) - AC-3 - <= 440 V 12 A - 230 V AC coil