Komponenter för switchboxar och skåp - sita 55

interface plug-in relay - Zelio RSB - 2 C/O - 230 V AC - 8 A

iC60N - miniature circuit breaker - 1P - 6A - C curve

Latching relay 1NO 8VFor pulse control of light installations.Rated current In: 16A AC1Rated Voltage Un: 230 / 400VACCoil Voltage Un: 8VACPulse Length: min. 50ms and max 1 hourTire consumption v. AC operation: 20VATouch protection: IP20Connection: 0.75 - 10mm2Dimensions: 1 module of 17.5mmStandard: EN 60669-1 / 2-2Note: Operating pressure must be selected in h.t. Attraction consumption, as well as lead length and dimension must be observed. See technical data in catalog.

TeSys GV2 - Circuit breaker - thermal-magnetic - 17...23 A - screw clamp terminals

Digital time switch with weekly program. Programming is carried out on the device. Brief instructions in the storage compartment For installation on TH35 DIN rails as per EN 60715Functions: 56 memory locations ON/OFF switching times Switch preselection ON/OFF permanent switching Manual switching Holiday program Toggling summer time/winter time: -automatic, can be deactivated, toggle rules for Europe,USA and other countries are already saved, customised toggle rules or toggling on a fixeddate can be selected PIN coding

Schneider Electric ABL8RPS24100 strömmatningstransformatorer

Siemens 3LD2203-1TL53 strömbrytare 4P Röd, Gul

This Acti9 iC60N is a low voltage miniature circuit breaker (MCB). It is a 4P circuit-breaker with 4 protected poles, 10A rated current and C tripping curve. It can be mounted on DIN rail for modular installation. As circuit-breaker, its breaking capacity, according to IEC/EN 60898-1, is 6000A at 400VAC. As circuit-breaker, its breaking capacity, according to IEC/EN 60947-2, is 20kA at 230VAC and 10kA at 400VAC. This miniature circuit breaker protects circuits against short circuit and overload currents. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. It becomes IP40 once in modular enclosure with insulation class II. its fast closing mechanism improves its service life. Its limitation class 3 (according to EN/IEC60898-1) improves downstream circuit protection cost. Its unique Visitrip indicator reduces intervention time by showing the faulty circuit. Its Visisafe green strip guarantees the physical opening of the contacts to allow downstream maintenance.

Siemens 6EP1961-2BA11 elektriska reläer

Siemens 3VA9467-0FK21 elektriska switchtillbehör

For 6 circuit breakers 2P 63A

Contactor, ac-3, 7.5kw/400v, 1no, dc 24v, 3-pole, sz s00 screw terminal

standard control unit LUCA - class 10 - 1.25...5 A - 24 V AC

TeSys D thermal overload relays - 2.5...4 A - class 10A

TeSys K - Auxiliary contact block - 2 NO + 2 NC - screw-clamps terminals

DEVIreg TM 316 is a simple, electronic thermostat with enhanced installation functionalityin cabinets with DIN rail fittings. The thermostat is primarily used for frost protection on roofs, igutters and downpipes. In addition, it can be used to control room and floor temperature,ventilation, cooling or snowmelt on the ground, pipe fencing and similar installations.The primary characteristics of the thermostat are the temperature setting range - with setting ofboth an upper and lower temperature, between which the thermostat allows the system to heat.This mode is primarily used to control frost protection systems on roofs, gutters anddownpipe (an external outdoor air sensor must be used).The thermostat is equipped with two additional buttons for adjusting the hysteresis andthe temperature value for use during economy periods (an external timer is required).The thermostat has a relay with two contact pairs - NO (normally open) and NC (normally closed), and it is intended to use the thermostat for heat andcooling systems. In addition, the NO and NC contact pairs are not powered by a voltage source within the thermostat and can be used forcontrol systems with any voltage up to 250 V. It is designed so that the sensor circuit is galvanically separated from the high voltage part.

short terminal shield - 3P - 630 A max

Siemens 3RT2916-1DG00 del och tillbehör för elektrisk kontaktor

Siemens 6EP1334-2BA20 eladaptrar inomhus Multifärg

This Resi9 product is a switch disconnector. It is a 4 poles switch disconnector with 40A rated current at 415VAC. This switch disconnector is used for control (opening and closing of circuits under load). This product is also used for disconnection of on-load electrical circuits already protected against overload and short-circuits. Electrical endurance goes up to 10000 cycles . Mechanical endurance goes up to 50000 cycles . The Ui rated insulation voltage is 500 VAC. It has a Uimp rated impulse withstand voltage of 6kV. The operating frequency is 50Hz or 60Hz. It can be mounted on a DIN rail for modular installation. Its width is 8 pitches of 9mm. The dimensions are (W) 72mm x (H) 81mm x (D) 70.5mm . The product weight is 309g. The color is white (RAL9003). According to IEC 60529 standard, the degree of protection is IP20 or IP40 in modular enclosure. The operating temperature is -25°C to 60°C. The storage temperature is -40°C to 85°C. This product complies with EN/IEC 60669-2-4 standard.

Schneider Electric ABLM1A24012 strömmatningstransformatorer

Schneider Electric LC1DT40P7 tillsatskontakter

Schneider Electric iCV40H strömbrytare 1P + N

Hager ADM463C strömbrytare Dvärgbrytare Typ A 4

Siemens 3RH2911-1HA31 tillsatskontakter