Komponenter för switchboxar och skåp - sita 50

Relay 16A 1NO+1NC 12VFor control of circuitsA control device with 3 positions on the frontRated operating voltage AC: 230V AC control voltage: 12Frequency: 50/60Hz Operating temperature: -10 to 50 ° C Connection cross-section with flexible conductor: 1 - 6mm 2 Cross-sectional area for rigid conductors: 1 - 10mm 2 A lifetime mechanical operations: 1000000 Equipment life, electrical operations: 30000 Total power loss at rated power: 1.6 W Number of modules: 1

MCB 1P+N 6KA C-10A 1M

MCB 1P+N 6KA C-10A 2M

[7825200127]

Schneider Electric C60SP strömbrytare 2P

Schneider Electric iC60 RCBO strömbrytare 2P

The B6-40-00 mini contactor is a compact 4 pole contactor with screw terminals. They are ideally suited for applications where reliability is a must and space is at a premium. Mini contactors are used in residential buldings, commercial buildings and industrial applications for the control of single or three-phase loads up to 4 kW (AC-3) and 20 A / 690 V (AC-1) or switching of control signals. Further features are the silent coil, a switch position indication and the integrated possibility for rail or wall mounting.

Schneider Electric iC40N strömbrytare 3P + N

Front operated switch-disconnector. Types OT 16...125 include protected terminal clamps, IP 20.

iC60N - miniature circuit breaker - 1P + N - 25A - C curve

fuse holder - GA -1 switch - 13 A - black

Auxiliary Contact Block for AF-contactors

Shaft for selector type handle.

TeSys GV2 - Enclosure for TeSys GV2ME - IP41

TeSys D - auxiliary contact block - 2 NO + 2 NC - screw clamp terminals

AF16Z contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF..Z contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...250 V 50/60 Hz or 12...250 V DC. AF..Z contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF..Z contactors allow direct control by PLC-output 24 V DC 500 mA and obtain a reduced holding coil consumption. AF..Z contactors withstand short voltage dips and voltage sags (SEMI F47-0706 compliance) between 24...250 V 50/60 Hz AF..Z contactors have built-in surge protection and do not require additional surge suppressors The AF... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, 1 built-in auxiliary contact, front and side-mounted add-on auxiliary contact blocks. (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available.

Over current switch, 13A, 1pole+N, type C characteristic

The RXG interface relay range comprises: 10 A relays with 1C/O contact and 5 A relays with 2C/O contacts. Sockets with separate contact terminals, screw connector connection and built-in plastic maintaining clamp, 35mm DIN rail mounting and Panel mounti

The RXG interface relay range comprises: 10 A relays with 1C/O contact and 5 A relays with 2C/O contacts. Sockets with separate contact terminals, screw connector connection and built-in plastic maintaining clamp, 35mm DIN rail mounting and Panel mounti

Zelio RUM relays are available with either 2 or 3 changeover contacts capable up to 10A each. Depending of model, RUM is available with up to 10 different supply voltages which will cover your every need.Zelio RUM relays is available for 2 different socke

power base - TeSys U - 32 A - screw clamps control

TeSys GV3 - Circuit breaker - magnetic - 40 A - EverLink BTR connectors

earthing module - 80 A - for V3 / V4

miniature plug-in relay - Zelio RXM - 2 C/O - 230 V AC - 12 A - with LED

Siemens 3RT2025-1BB40 övrigt