Komponenter för switchboxar och skåp - sita 44

Acti9 IC60 RCBO 2P 10A 30mA C 10kA SI. For protection of end circuit, and protection of people against electric shock at direct contact ( 30 mA). As well as ground fault at front plate.

Siemens 5SG7163 strömbrytare 4P

Relay, n-type with 1 no and 1nc kontakt for ac 230v 16a control ac 230v

TeSys K contactor - 3P(3 NO) - AC-3 - <= 440 V 6 A - 24 V DC coil

Schneider Electric LR2K0312 elektriska reläer Svart, Vit

Zelio RXG is a series of plug-in relays for DIN-rail mounting.With a width of only 16 mm. The relays do not take up valuable space in the panel and the 4 different versions make them suitable for any application.The RXG relays can also be used in socket from different suppliers as the placement of the pins on the relays is identical.The unique test button makes it possible to test and operate without any tool and with just one finger.Zelio RXG is available with both 1 changeover contact for 10A and 2 changeover contacts for 5A loads.It is possible to get RXG in a transparent version or a version with either a test button, LED or both combined.The protection modules (diode, diode + LED, RC-circuit or Varistor + LED) are easilly fitted to the socket and are the same for both RXG, RSB or RXM relays. Legends are available for all RXG or RSB socket which makes it possible to identify both socket and relay.RGZS08 is a busjumper for connecting up to 8 sockets on a DIN-rail in a panel.The pins a slightly bended which makes it easy to mount 2 jumpers in parallel and still have room for the wiring.RGZS08 fits both the RGZE1S35M and RGZE1S48M socket.

Front operated switch-disconnector. Types OT 16...125 include protected terminal clamps, IP 20.

Schneider Electric C60SP strömbrytare 2P

MCB 1P+N 6KA C-13A 2M

Latching relay 1NC+1NO 230VFor pulse control of light installations.Rated current In: 16A AC1Rated Voltage Un: 230 / 400VACVoltage Voltage Un: 230VAC / 110VDCPulse Length: min. 50ms and max 1 hourPower consumption v. AC operation: 24VATouch protection: IP20Connection: 0.75 - 10mm2Dimensions: 1 module of 17.5mmStandard: EN 60669-1 / 2-2Note: Operating pressure must be selected in h.t. Attraction consumption, as well as lead length and dimension must be observed. See technical data in catalog.

PowerTags are energy sensor modules for 1P + N, 3P and 3P + N networks. They are mounted directly on devices in the iC40 series with modular width of 18 and 54mm up to 63A, and R9 Flex with 15cm wire for meter unit. Combined with FESB Facility Expert Small Business via radio frequency communication Zigbee, PowerTag sensors measure the kWh value in accordance with the IEC 61.557-12 standard. Accumulated active energy consumption in kWh.

Siemens 7LF4511-0 strömbrytare

Siemens 3RV2011-0DA10 övrigt

Zelio RSB are a series of compact plug-in relays with a width of only 16 mm.The relays are available with 1 C/O with either 12 and 16A or 2 C/O contacts with 8A maximum load.It is possible to insert a protection module (diode, varistor or RC-circuit) into the relay socket if needed.The sockets RSZE1S35M and RSZE1S48M has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RSB1A120P7PV is a complete plug-in relay mounted into a RSZE1S35M socket with a maintaining clamp, which secure that the relay stays in the socket even in an environment with vibrations.The socket has a varistor interserted for protection against voltage spikes generated by coils in the panel.The varistor module has also a build-in LED for indication of supply to the relay.RSB1A120P7PV has a 1 C/O AgNI contact with a maximum load of 12A.The relay has a lifetime of 100.000 cycles (depending on load).Supply voltage to the RSB1A120P7PV is 230 VAC and average coil co

TeSys D control relay - 3 NO + 2 NC - 690 V - 24 V DC low consumptio coil

door interlock - set of 5

3 phase Kilowatt-hour meter for DIN rail mounting. measuring in 4 quadrants, multiple tariffs with counter and M-bus communications, digital I / O and MID certified.This model provides a direct measurement of I, D, P, Q, S, and E up to 1 / 5A (depending o

W: 80 x H:158 x D:125 mm

Shaft for selector type handle.

Phase sequence relay CM-PFE, width 22.5mm, measuring range L1-L2-L3=208-440VAC, powered by measuring circuit, 1 c/o (closed circuit principle)

Digital time switch with week program for installation in switch cabinets1 channelSwitching capacity 16 APermanent by date / holiday functionDaily and weekly programPulse function46 memory locationsMinimum interval 1 min.Manual permanent modeManual overrideAutomatic sorting of switching times on readoutUnrestricted block programmingFully automatic daylight saving timeElapsed time and pulse counterSecurity by PIN code

Weekly dial, 3 Modules f. DIN rail M36

Siemens 5SL4510-7 strömbrytare 2

Front operated switch-disconnector. Types OT 16...125 include protected terminal clamps, IP 20.

This Acti9 iC60N is a low voltage miniature circuit breaker (MCB). It is a 3P+N circuit-breaker with 3 protected poles, 16A rated current and C tripping curve. It can be mounted on DIN rail for modular installation. As circuit-breaker, its breaking capacity, according to IEC/EN 60898-1, is 6000A at 400VAC. As circuit-breaker, its breaking capacity, according to IEC/EN 60947-2, is 20kA at 230VAC and 10kA at 400VAC. This miniature circuit breaker protects circuits against short circuit and overload currents. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. It becomes IP40 once in modular enclosure with insulation class II. its fast closing mechanism improves its service life. Its limitation class 3 (according to EN/IEC60898-1) improves downstream circuit protection cost. Its unique Visitrip indicator reduces intervention time by showing the faulty circuit. Its Visisafe green strip guarantees the physical opening of the contacts to allow downstream maintenance. This double terminal miniature circuit breaker reflects Schneider Electric expertise with more than 40 years developing modular devices for the protection of electrical circuits in all applications. It has a longer service life thanks to its high limitation and fast closing. This product is compliant with both IEC 60898-1 and IEC 60947-2, has IP20B finger proof terminals with double the tightening torque versus the standard and is DIN rail mountable. It offers VisiTripTM for safety during maintenance and VisiSafeTM to reduce intervention time.