Komponenter för switchboxar och skåp - sita 37

TeSys D - auxiliary contact block - 1 NO + 3 NC - screw clamp terminals

Safety transformer 60VA 12-24V 4M

Schneider Electric LC1D

Siemens 5SY4504-7 strömbrytare 2

Detachable, mountable separately to the base plate

Siemens 3RT2025-1AP00 elektrisk kontaktor

Schneider Electric LC1D12BD tillsatskontakter

Siemens 5SY4632-7 övrigt

Zelio RSB are a series of compact plug-in relays with a width of only 16 mm.The relays are available with 1 C/O with either 12 and 16A or 2 C/O contacts with 8A maximum load.It is possible to insert a protection module (diode, varistor or RC-circuit) into the relay socket if needed.The sockets RSZE1S35M and RSZE1S48M has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RSB1A160P7PV is a complete plug-in relay mounted into a RSZE1S48M socket with a maintaining clamp, which secure that the relay stays in the socket even in an environment with vibrations.The socket has a varistor interserted for protection against voltage spikes generated by coils in the panel.The varistor module has also a build-in LED for indication of supply to the relay.RSB1A160P7PV has a 1 C/O AgNI contact with a maximum load of 16A.The relay has a lifetime of 100.000 cycles (depending on load).Supply voltage to the RSB1A160P7PV is 230 VAC and average coil co

[7825300195]

Latching relay 2NO 8V1 moduleRated operational voltage: 250VType of contacts: 2NOScrew connectionFrequency: 50/60Hz

TeSys K - differential thermal overload relays - 1.8...2.6 - class 10A

Front operated switch-disconnector. Types OT 16...125 include protected terminal clamps, IP 20.

miniature plug-in relay - Zelio RXM - 2 C/O - 24 V DC - 12 A - with LED

Interconnection of overvoltage arrester 12M

Zero separation piece 200A box 1 Product description:

Siemens 3VA9157-0FK21 övrigt

The Zelio Solid State Relays are available for all kinds of interfacing and control and load switching, particularly for heating, motion, and lighting control applications.The relays have been divided into three key ranges based on form factor and features for applications:Zelio SSL solid state relays are slim, with a DIN-rail mountable SSLZ socket (6 mm wide). They are ideal for panels where space is at a premium.Zelio SSM solid state relays are ready to use, modular, and DIN-rail mountable. They are compact and include an integrated heatsink. Available in single and three-phase options up to 55 A and 25 A, respectively. Zelio SSP panel mount solid state relays include a full range of heatsinks and accessories to meet the needs of all kinds of applications. Available with single and three-phase options up to 125 A and 50 A, respectively.Together, these three ranges comprise a comprehensive offer featuring solid state technology, allowing fast and high-frequency switching, precision machine control, and a practically unlimited lifespan. This makes Zelio solid state relays a best-in-class choice for applications in packaging, plastic & rubber, textiles, and food & beverage. All of the new Zelio relays are Green PremiumTM products with certification and compliance of industrial standards, e.g. UL, CSA, EAC. Green Premium is a Schneider Electric ecolabel that guarantees environmental friendliness without compromising on performance.

This Acti9 electrical auxiliary is a modular OC and fault contact. The 2 contacts (2 NO/NC) can report the signalling information of the associated device to a programmable logic controller. The rated current (In) is from 2mA to 100mA with operating frequency of 50Hz to 60Hz at 24VAC to 240VAC, and from 2mA to 100mA at 24VDC to 220VDC. It has 2 position switches with contacts type 2 C/O. It is intended for new or renovated installation in small commercial, buildings, critical buildings, healthcare, industry, data center and infrastructures. This OC and fault contact is compatible with Acti9 ranges such as iC60, iID, iDPN ARC, iDPN Vigi, iDPN Vigi ARC, iSW, iC60 and iID double terminals residual current circuit breaker (RCCB). The OC and fault contact is installed for only Acti9 ranges such as iID, iDPN Vigi, iSW-NA, ARA, iC60 and RCA devices which includes 2 changeover contacts. If there is no comb busbar, it is also compatible with iC40, iC40 ARC, iCV40, iCV40 Vigi ARC. The iSD+OF is either used for device short name or compatibility code. The mechanical indicator is provided on the product for signalling (Local). It has a screw clamp terminal connection at top and bottom. The connection allows rigid copper cable. The cable cross section capacity is from 1mm2 to 4mm2. It has a screw clamp terminal connection at top and bottom. The connection allows flexible copper cable. The cable cross section capacity is from 0.5mm2 to 2.5mm2. It has a screw clamp terminal connection at top and bottom. The connection allows rigid copper cables (2 cables). The cable cross section capacity is 2.5mm2. It has a screw clamp terminal connection at top and bottom. The connection allows flexible with ferrule copper cables (2 cables). The cable cross section capacity is 1.5mm2. The rated insulation voltage (Ui) is up to 500V. It has a rated impulse withstand voltage (Uimp) of 4kV. The width in 9mm pitches is 1. The dimensions are (W) 9mm x (H) 90mm x (D) 73mm. The product colour is white

Siemens 6EP1333-3BA10 eladaptrar inomhus Multifärg

Schneider Electric C60SP strömbrytare 2P

Siemens 5SY6610-7 övrigt

TeSys K contactor - 3P(3 NO) - AC-3 - <= 440 V 12 A - 24 V DC coil

Relay,n-type w 2 changeov.cont. contact for ac 230, 400v 16a control dc 24v

Fuse NH00 AM 80A top 690V