Komponenter för switchboxar och skåp - sita 28

TeSys GV3-Circuit breaker-thermal-magnetic - 17...25A - EverLink BTR connectors

Schneider Electric LC1D12BD tillsatskontakter

Siemens 5SV3346-4 strömbrytare 4P

DEVIreg TM 330 is a series of simple electronic thermostats for installation in cabinets withDIN rail bracket. To measure and control the desired temperature, either one must be usedwiring sensor (in the kit) or an external or space sensor. The thermostat must be installedafter a multi-pole switch. It has an LED indicator that shows standby periods (green light) andheating periods (red light).DEVIreg TM 330 has a relay with two contact pairs - NO (normally open) and NC (normally closed) andis intended to be used for heating and cooling systems. In addition, the NO and NC contact pairsnot supplied by a voltage source inside the thermostats and can be used forcontrol systems with any voltage up to 250 V.The series is designed with thermostats in three temperature ranges.DEVIreg TM 330 (-10 - +10 ° C) is primarily used to control a lower temperature range such asantifreeze. This thermostat has a knob for adjusting the temperature setting with a scalefrom -10 to +10 ° C. Special outdoor wire with white wire, 2,5m, is included in a set.

iID - earth leakage protection - 4P - 40A - 300mA - A type

Vigi iC60 - earth leakage add-on block - 2P - 25A - 30mA - A type

HF4B 300/5A KL 0.2S/0.2 2/3VA Current Transformer Product Description: HF4B 300/5A KL 0.2S/0.2 2VA Current Transformer. IEC 61869-2, CE marked, Kema-Keur approved, UL94 V-0 rated. Application: Billing.

This Acti9 iC60N is a low voltage miniature circuit breaker (MCB). It is a 2P circuit-breaker with 2 protected poles, 16A rated current and C tripping curve. It can be mounted on DIN rail for modular installation. As circuit-breaker, its breaking capacity, according to IEC/EN 60898-1, is 6000A at 400VAC. As circuit-breaker, its breaking capacity, according to IEC/EN 60947-2, is 20kA at 230VAC and 10kA at 400VAC. This miniature circuit breaker protects circuits against short circuit and overload currents. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. It becomes IP40 once in modular enclosure with insulation class II. its fast closing mechanism improves its service life. Its limitation class 3 (according to EN/IEC60898-1) improves downstream circuit protection cost. Its unique Visitrip indicator reduces intervention time by showing the faulty circuit. Its Visisafe green strip guarantees the physical opening of the contacts to allow downstream maintenance.

Detachable, mountable separately to the base plate

TeSys LE - enclosure for DOL starter - without pushbuttons

TeSys D thermal overload relays - 1.6...2.5 A - class 10A

4P 63A 30mA A class

Medium voltage DIN fuse link,complete with sealed striker, suitable for transformerprotection. EATON Cooper Bussmann ‘F’ range provide full range protection.

Terminal shroud for OT16...40F3, -FT3, 3-pole shroud, transparent.

Auxiliary Contact Block for AF-contactors

The ESB63..N installation contactors are used to control single and three-phase loads up to 40 A and can be operated by AC or DC voltages. These contactors are made for use in household applications as well as in industrial environments.The following benefits are provided: Hum-free operation, low power consumption and integrated overvoltage protection. Various contact combinations and accessories are available.

The B6-30-10 mini contactor is a compact 3 pole contactor with 1 auxiliary contact and screw terminals. They are ideally suited for applications where reliability is a must and space is at a premium. Mini contactors are used in residential buldings, commercial buildings and industrial applications for the control of single or three-phase loads up to 4 kW (AC-3) and 20 A / 690 V (AC-1) or switching of control signals. Further features are the silent coil, a switch position indication and the integrated possibility for rail or wall mounting.

Hours counter 230V 50Hz 2M

PFI relay 40A 3P+N 30mA Type B

TeSys GV2 - Circuit breaker - thermal-magnetic - 20...25 A - screw clamp terminals

TeSys GV2-Circuit breaker-thermal-magnetic - 1.6...2.5 A - screw clamp terminals

shaft extension - Mini-VARIO and VARIO - for V02...V2 / VN12 / VN20

TeSys D thermal overload relays - 23...32 A - class 10A

TeSys D thermal overload relays - 30...38 A - class 10A

Over current switch, 10A, 3pole+N, type C characteristic