Schneider Electric Komponenter för switchboxar och skåp - sita 17

Schneider Electric LV428941 övrigt

TeSys D - auxiliary contact block - 3 NO + 1 NC - screw clamp terminals

TeSys GV3-Circuit breaker-thermal-magnetic - 37...50A - EverLink BTR connectors

TeSys D - time delay auxiliary contact block - 1NO + 1NC - screw clamp terminals

standard control unit LUCA - class 10 - 3...12 A - 110...220 V DC/AC

This Resi9 product is a modular residual current breaker with overcurrent protection (RCBO). It is a 3P+N circuit breaker with 3 protected poles and 10A In rated current and C tripping curve. The earth leakage protection class is A type with a sensitivity of 30mA. The earth-leakage protection time delay is instantaneous. The rated short-circuit breaking capacity is up to 6000A conforming to EN/IEC 61009-2-1 standard. This product protects against short-circuit, cable overload, electrical shock by indirect contact and fire hazards. It brings safety, reliable solution for commercial and industrial applications with high breaking capacity. This product complies with EN/IEC 61009-2-1 and EN/IEC 61009-1 standards. The electrical endurance is up to 7500 cycles and the mechanical endurance is up to 20000 cycles. This circuit-breaker has a position contact indicator, and also has a ON/OFF indication for local signalling with toggle control. It has a tunnel type terminals connection at top or bottom. The connection allows rigid copper cables. The cable cross section capacity is from 1mm2 to 16mm2. The connection allows flexible copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The connection allows flexible with ferrule copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The Ue rated operational voltage is up to 400VAC with operating frequency of 50Hz. The Ui rated insulation voltage is up to 400V. The Uimp rated impulse withstand voltage is 4kV. The overvoltage category is 3. It can be mounted on DIN rail for modular installation. The width in 9mm pitch is 10. The dimensions are (W) 90mm x (H) 91mm x (D) 72.5mm. The product colour is white (RAL 9003). The product weight is 500g. The pollution degree is 2. The tightening torque of connection is 2N.m (top or bottom) for PZ2 screwdriver type. The wire stripping length is 13mm (top or bottom). According to IEC 60529 standard, the IP degree of protection is IP20 and becomes IP40 once in mo

4 connectors - cable - 120..185 mm2

iC60H - miniature circuit breaker - 4P - 10A - C curve

Schneider Electric GV2ME20 strömbrytare

TeSys D - auxiliary contact block - 1 NO + 3 NC - screw clamp terminals

Schneider Electric LC1D12BD tillsatskontakter

miniature plug-in relay - Zelio RXM - 2 C/O - 24 V DC - 12 A - with LED

TeSys K - differential thermal overload relays - 1.8...2.6 - class 10A

Schneider Electric LC1D

Schneider Electric GVAD1010 tillsatskontakter

front rotary handle - black handle - for INS/INV320...630 & INSJ400

shaft extension - Mini-VARIO and VARIO - for V02...V2 / VN12 / VN20

TeSys K contactor - 3P(3 NO) - AC-3 - <= 440 V 12 A - 24 V DC coil

Acti9 IC60 RCBO 2P 10A 30mA C 10kA SI. For protection of end circuit, and protection of people against electric shock at direct contact ( 30 mA). As well as ground fault at front plate.

TeSys D reversing contactor - 3P(3 NO) - AC-3 - <= 440 V 9 A - 24 V AC coil

Zelio RSB are a series of compact plug-in relays with a width of only 16 mm.The relays are available with 1 C/O with either 12 and 16A or 2 C/O contacts with 8A maximum load.It is possible to insert a protection module (diode, varistor or RC-circuit) into the relay socket if needed.The sockets RSZE1S35M and RSZE1S48M has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RSB1A160P7PV is a complete plug-in relay mounted into a RSZE1S48M socket with a maintaining clamp, which secure that the relay stays in the socket even in an environment with vibrations.The socket has a varistor interserted for protection against voltage spikes generated by coils in the panel.The varistor module has also a build-in LED for indication of supply to the relay.RSB1A160P7PV has a 1 C/O AgNI contact with a maximum load of 16A.The relay has a lifetime of 100.000 cycles (depending on load).Supply voltage to the RSB1A160P7PV is 230 VAC and average coil co

Schneider Electric LC1D115P7 tillsatskontakter

This Acti9 electrical auxiliary is a modular OC and fault contact. The 2 contacts (2 NO/NC) can report the signalling information of the associated device to a programmable logic controller. The rated current (In) is from 2mA to 100mA with operating frequency of 50Hz to 60Hz at 24VAC to 240VAC, and from 2mA to 100mA at 24VDC to 220VDC. It has 2 position switches with contacts type 2 C/O. It is intended for new or renovated installation in small commercial, buildings, critical buildings, healthcare, industry, data center and infrastructures. This OC and fault contact is compatible with Acti9 ranges such as iC60, iID, iDPN ARC, iDPN Vigi, iDPN Vigi ARC, iSW, iC60 and iID double terminals residual current circuit breaker (RCCB). The OC and fault contact is installed for only Acti9 ranges such as iID, iDPN Vigi, iSW-NA, ARA, iC60 and RCA devices which includes 2 changeover contacts. If there is no comb busbar, it is also compatible with iC40, iC40 ARC, iCV40, iCV40 Vigi ARC. The iSD+OF is either used for device short name or compatibility code. The mechanical indicator is provided on the product for signalling (Local). It has a screw clamp terminal connection at top and bottom. The connection allows rigid copper cable. The cable cross section capacity is from 1mm2 to 4mm2. It has a screw clamp terminal connection at top and bottom. The connection allows flexible copper cable. The cable cross section capacity is from 0.5mm2 to 2.5mm2. It has a screw clamp terminal connection at top and bottom. The connection allows rigid copper cables (2 cables). The cable cross section capacity is 2.5mm2. It has a screw clamp terminal connection at top and bottom. The connection allows flexible with ferrule copper cables (2 cables). The cable cross section capacity is 1.5mm2. The rated insulation voltage (Ui) is up to 500V. It has a rated impulse withstand voltage (Uimp) of 4kV. The width in 9mm pitches is 1. The dimensions are (W) 9mm x (H) 90mm x (D) 73mm. The product colour is white

Schneider Electric C60SP strömbrytare 2P

The Zelio Solid State Relays are available for all kinds of interfacing and control and load switching, particularly for heating, motion, and lighting control applications.The relays have been divided into three key ranges based on form factor and features for applications:Zelio SSL solid state relays are slim, with a DIN-rail mountable SSLZ socket (6 mm wide). They are ideal for panels where space is at a premium.Zelio SSM solid state relays are ready to use, modular, and DIN-rail mountable. They are compact and include an integrated heatsink. Available in single and three-phase options up to 55 A and 25 A, respectively. Zelio SSP panel mount solid state relays include a full range of heatsinks and accessories to meet the needs of all kinds of applications. Available with single and three-phase options up to 125 A and 50 A, respectively.Together, these three ranges comprise a comprehensive offer featuring solid state technology, allowing fast and high-frequency switching, precision machine control, and a practically unlimited lifespan. This makes Zelio solid state relays a best-in-class choice for applications in packaging, plastic & rubber, textiles, and food & beverage. All of the new Zelio relays are Green PremiumTM products with certification and compliance of industrial standards, e.g. UL, CSA, EAC. Green Premium is a Schneider Electric ecolabel that guarantees environmental friendliness without compromising on performance.