Pushbutton 1NO 16A 250VAC 1M

MCB type B In: 10A

MCB 1P+N 6KA C-6A 2M

Thermostat 1NO 10A

Enclosure IP30 4M 1 row with PE terminal

Sealing kit for enclosure Gamma (accessorie)

Motor starter for protection of 1 and 3 phase motors

Auxiliary contact 1 open + 1 closed

11 Brass terminals 5x16+6x10 mm2 earth

Light sensitive switch enhanced 16A AC1 IP54

Distribution enclosure 4row 48M VH48DKN

Kabelränna inuti hörn, kritvit, RAL 9010

Out : 1 x 70mm2 + 6x16mm2

2P 25A 30mA A class

Latching relay 2NO 24VFor pulse control of light installations.Rated current In: 16A AC1Rated Voltage Un: 230 / 400VACVoltage Voltage Un: 2 4VAC / 12VDCPulse Length: min. 50ms and max 1 hourPower consumption v. AC operation: 24VATouch protection: IP20Connection: 0.75 - 10mm2Dimensions: 1 module of 17.5mmStandard: EN 60669-1 / 2-2Note: Operating pressure must be selected in h.t. Attraction consumption, as well as lead length and dimension must be observed. See technical data in catalog.

Auxiliary contacts + adapter

Latching relay electronic 1NO 8-24V

Metal surface mount cabinet 72M

Flat bend halogen free for installation duct LF/LFH 40060 pearl white

Blind cover for one module

Contactor 25A 4NO 24V 2MStandard for the control of circuitsCan be equipped with auxiliary contact and sealig capsRated operational voltage: 400 V AC control voltage: 24V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 1 / 10mm2 Connection cross-sect. flexible cable: 1 / 6mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 2According to standard: EN 61095

Contactor 25A 2NO 24V Standard for the control of circuitsCan be equipped with auxiliary contact and sealig capsRated operational voltage: 230 V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 1 / 10mm2 Connection cross-sect. flexible cable: 1 / 6mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 1According to standard: EN 61095

Contactor 25A 1NO+1NC 230V Standard for the control of circuitsCan be equipped with auxiliary contact and sealig capsRated operational voltage: 230 V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 1 / 10mm2 Connection cross-sect. flexible cable: 1 / 6mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 1According to standard: EN 61095

Modular switch disconnector 4-pole 63A 400V 4MFor cutting off all current circuitsCategory: AC22A 230V/400VNominel current: 32A to 63A size 2 Connection terminals: rigid conductor 25mm2 - flexible conductor 16mm2

Safety transformer with galvanic isolation between primary and secondary windings.
All transformers are thermally overload and short circuit protected.
Rated voltage: 230V / 12-24VAC
Load: 40VA
Rated current: In 12V/ 3.33A
Rated current: In 24V/ 1.67A
Ambient temperature: max. 35grC
Standard: EN61558
Dimensions: 4 modules of 17.5mm