Uponor Golvvärme

Wireless room thermostat in white high gloss with display with integrated measurement of relative humidity.

Uponor Smatrix Wave thermostat standard T-165 pod

Ventilation cover UPONOR WGF from 1.

Uponor thermostat T-23 230 V.

Uponor Smatrix Wave thermostat dig T-166

Uponor Tacker stapling tool 14-20mm

Uponor Smatrix Wave controller Pulse X-265 6X wireless radiant heating/cooling controller a Uponor Smatrix Wave Pulse system supports up to 4 controller not compatible to Uponor Smatrix Wave controller X-163/X-165 6XFunctions: Autobalancing eletronic control supports up to 6 room thermostats supports up to 8 actuators (24V) heating/cooling function switched by contact sensing input or in public TH pump relay boiler relay valve and pump exercise overload protection combines underfloor heating/cooling and ceiling cooling control Uponor Smatrix com Pulse R-208 connectivity via RJ45 cableOptions: control and configuration via Uponor Smatrix Pulse app, remote control and smart home integration via Uponor SmatrixCom Pulse R-208 additional 6 channels and actuator outputs (24V) via Uponor Smatrix Wave slave module Pulse M-262 6X cabinet or wall-mounted installation (DIN rail or screw holes)Content: Uponor Smatrix Wave controller Pulse X-265 6X antenna first step instructions safety instructions mounting material conformity: CE / EAC operating voltage: 230V / 50Hz max. power input per actuator: 24VAC / 0.2A protection class: Class II IP20 color: white

Temperature sensor Uponor 20-55°C

Modules for 1,3,4,6 loops, combineable to max. 12 loops, for connection with basic kit, connection right or left with flat sealing, or connection from below with optional elbowset, supply with lockshield valve for balancing ( with adjusting ring) and shutoff, adjusting ring for balancing without tools, prepared places for room name labels, return with valves and caps, prepared for actuators No.1000138 (24V male) No. 1005605 (230V male) loop connection Q&E 20, Q&E 17 complete with Q&E Rings 1025659,1042836 loop pitch 50 mm header pitch 225 mm max. pressure: 6 bar max. temperature: 60°C material: fibre glass reinforced polyamide

Uponor Smatrix Wave relay module M-161

Wireless room sensor with with integrated measurement of relative humidity.

Uponor Smatrix com. Pulse R-208 establishes connection between Uponor Smatrix Pulse system and smartphone/tablet and Uponor cloud remote/local access via Uponor Smatrix Pulse app (internet connection required)Functions: temporary wi-fi access point for direct access (if local wi-fi is not available) access via local wi-fi remote access via internet connection smart home ecosystem integration (Amazon Alexa, Google Home, IFTTT) over-the-air updates multi-home control smart alerts via Uponor Smatrix Pulse app third-party access for remote support (user allowance required) history trend analysis via Uponor Smatrix Pulse app timer programming comfort settings supply diagnostics secure encrypted connection to Uponor cloudContent: Uponor Smatrix com Pulse R-208 adaptor for DIN rail installations RJ45 connection cable (1.5m) first step instructions safety instructions mounting material conformity: CE / EAC power supply: RJ45 cable to Uponor Wave or Uponor Base controller Pulse ethernet interface: 10/100 Mbps (RJ45) ethernet protocols: Ethernet II protection class: Class II IP20 color: white

Uponor Smatrix Wave slave module Pulse M-262 6X 6 channel slave module that expands a Uponor Smatrix Wave controller Pulse X-265 6X not compatible to Uponor Smatrix Wave controller X-163/X-165 6XFunctions: click-in installation no additional wiring needed supports up to 6 room thermostats supports up to 6 actuators (24V) electronic control conformity: CE / EAC operating voltage: 230V / 50Hz max. power input per actuator: 24VAC / 0.2A protection class: IP20 color: white

Uponor Fluvia T PUSH 12 WL-G pump unit.

Uponor Smatrix Base PRO controller X-147 Bus protection class: Class II IP20 color: grey RAL7015Consisting of: Uponor Smatrix Base PRO controller X-147 Bus 6X quick guide, security instructions micro SD card (pre-inserted) DIN rail (length: 37cm) mounting material

For 1 and 1 1/4 WGF manifolds.

Shunt for flow temperature control of heating or cooling installations in walls, floors or ceilings. Typically used in installations where no central shunt with outside compensation is located in the heat producing plant or in mixed installations where both underfloor heating and radiators are used. Comes with built-in control option on the secondary side and check valve.The shunt is particularly suitable for mounting on direct district heating in new buildings where there is a requirement for outdoor compensation according to DS 469.- Mounting directly on manifold- Covers 350 m2 at 25 Wm2 and 30 Kpa or 175 m2 at 50 Wm2 and 30 Kpa- Weather compensation sensor- Electronically regulated flow temperature with motor controlled 3-way valve via Smatrix Move X-167- Motor controlled 2 way valve- Variable temperature between 15-60°C- Pump Wilo Yonos Para 15/6, 230V EEI 0.17- Primary side max. 90°C, 10 bar- Secondary side max. 60°C, 10 bar- Connection primary side 34" socket

Thermoelectric 230V telestat for Vario S manifolds. With function indicator. Powerless closed.Mounted on the floor heating manifold return valve. Can be used on valve with M30 thread, possibly with Thermostat T-23 VVS no. 46.6237.230

Fixed manifold c/c 50 mm for underfloor heating in stainless steel with 3/4 Euroconus.Comes complete with supports1 access pieces with bypass/level gaskets and drain/filling valvesBalancing of the circuits is done on the flow distribution pipe. The handwheels on the return manifold can be replaced by telestat part no. 466235324 - 24 V.

Compression adapter made of brass, with integrated clampring, for connection of Uponor Smart UFH-pipes to manifolds with thread 3/4“ eurocone, acc. EN 16313.

Thermoelectric 230V for mounting on manifold with M30 x 1,5 mm adapter.The actuator has been specially developed, tested and approved for Uponor Smatrix room regulation with dynamic automatic control.With function indicator.Delivered locked half open to facilitate installation, powerless shutdown works after the first time the telestate gets voltage.CE MarkedColor: BlueProtection class: IP 54Voltage: 24V AC / DC

Basic package Uponor pro

Grooved polystyrene insulation panel for underfloor heating pipes at 300mm c/c. Panel dimensions 1200 x 790mm, available in two thicknesses 30 & 50. Used together with heat emission plate 1009132. Allow 0,95 m2/pcs (1,05 pcs/m2).

Uponor Smatrix Wave slave module M-160

Modules for 1,3,4,6 loops, combineable to max. 12 loops, for connection with basic kit, connection right or left with flat sealing, or connection from below with optional elbowset, supply with lockshield valve for balancing ( with adjusting ring) and shutoff, adjusting ring for balancing without tools, prepared places for room name labels, return with valves and caps, prepared for actuators No.1000138 (24V male) No. 1005605 (230V male) loop connection Q&E 20, Q&E 17 complete with Q&E Rings 1025659,1042836 loop pitch 50 mm header pitch 225 mm max. pressure: 6 bar max. temperature: 60°C material: fibre glass reinforced polyamide