Reducer pe-hd d110/75 l8 eccentric

Geberit Pluvia roof outlet with fastening flange, for roof foils: Maximum discharge rate=12l/s

Sheeting, punched: 12l/s

Geberit Mepla coupling: d=32mm

Geberit Mepla adapter with female thread: d=26mm, Rp=3/4

For flush actuation with Geberit Sigma concealed cisterns.For concealed cisterns UP320For front operationFor concealed cisterns UP300For usage together with Geberit Sigma concealed cisterns 8 cm (UP720 and UP700)

The Geberit Mapress electro-galvanized press fitting system can be used for joining pipes in closed hot and cold water systems as well as sprinkler systems, fire-fighting water pipes and compressed air networks. Mapress electro-galvanized fittings are made of unalloyed steel. The press joining of pipes and fittings must be carried out with press jaws with an M-profile. When pressing, the pipe is inserted into the press fitting to the marked insertion depth and is thus pressed together.

Please note that Geberit Mapress pipes should be cut to size with a regular pipe cutter before use, and then deburred both inside and outside with a suitable deburring tool. Cutting and deburring are important precisely to avoid damage to the O-ring when the pipe is inserted into the press fitting.

Geberit 31210 vattenslangstillbehör Slanganslutning Rostfritt stål 1 styck

For cold and hot potable water, For heating water, For cooling water without antifreeze agent, For cooling water with antifreeze agent, For remote network heating water 120 °C, For saturated steam 120 °C, For service water, For ultrapure water (except pharmaceutical water), For rainwater with a pH value of > 6.0, For grey and black water with pH value > 6.0, For extinguishing water (wet), For sprinklers (wet), For chemicals and technical liquids, For compressed air (oil purity class 0–3), For negative pressure, For inert gases (e.g. nitrogen), For industrial gases (e.g. acetylene, shielding gases), For technical building systems, industry and shipbuilding, Application overview: Geberit Mapress Stainless Steel for liquid media, Application overview: Geberit Mapress Stainless Steel for gaseous media.

T-piece cst d35-22-35 zn-pl

Reducer w/ plend cst d35-28 zn-pl

Geberit Mepla T-piece with female thread: d=50mm, Rp=1/2, d1=50mm

Geberit Mepla adapter union with male thread: d=20mm, R=1/2, G=3/4

Geberit Mepla adapter with female thread: d=26mm, Rp=1

Geberit Mepla T-piece, reduced: d=26mm, d1=20mm, d2=26mm

Geberit Mepla reducer: d=63mm, d1=40mm

For cold and hot potable water, For heating water, For cooling water without antifreeze agent, For cooling water with antifreeze agent, For remote network heating water 120 °C, For saturated steam 120 °C, For service water, For ultrapure water (except pharmaceutical water), For rainwater with a pH value of > 6.0, For grey and black water with pH value > 6.0, For extinguishing water (wet), For sprinklers (wet), For chemicals and technical liquids, For compressed air (oil purity class 0–3), For negative pressure, For inert gases (e.g. nitrogen), For industrial gases (e.g. acetylene, shielding gases), For technical building systems, industry and shipbuilding, Application overview: Geberit Mapress Stainless Steel for liquid media, Application overview: Geberit Mapress Stainless Steel for gaseous media.

Geberit 30304 rördelar för avlopp, avfall och ventilation (DWV)

Pieces of PEH for welding, are used for wastewater installations. With TPE sound attenuation.

Geberit 32008 vattenslangstillbehör Slanganslutning Rostfritt stål 1 styck

Geberit Mepla T-piece, reduced: d=32mm, d1=16mm, d2=32mm

Geberit Mepla T-piece, equal: d=63mm

For building drainage, For site drainage

Pieces of PEH for welding, are used for wastewater installations. With TPE sound attenuation.

T-piece ft cst d54-rp3/4-54 zn-pl