Geberit - sita 11

Reducer pe-hd d63/50 l8 eccentric

For washbasins

For flush actuation with Geberit Omega concealed cisterns

Geberit Mepla adapter with male thread: d=40mm, R=1

For cold and hot potable water, For heating water, For cooling water without antifreeze agent, For cooling water with antifreeze agent, For remote network heating water 120 °C, For saturated steam 120 °C, For service water, For ultrapure water (except pharmaceutical water), For rainwater with a pH value of > 6.0, For grey and black water with pH value > 6.0, For extinguishing water (wet), For sprinklers (wet), For chemicals and technical liquids, For compressed air (oil purity class 0–3), For negative pressure, For inert gases (e.g. nitrogen), For industrial gases (e.g. acetylene, shielding gases), For technical building systems, industry and shipbuilding, Application overview: Geberit Mapress Stainless Steel for liquid media, Application overview: Geberit Mapress Stainless Steel for gaseous media.

Geberit 32107 vattenslangstillbehör Slanganslutning Rostfritt stål 1 styck

Geberit 30404 rördelar för avlopp, avfall och ventilation (DWV)

Adapter mt cst d54-r2 zn-pl

Geberit 31464 vattenslangstillbehör Slanganslutning Rostfritt stål 1 styck

Geberit 369.045.16.1 rördelar för avlopp, avfall och ventilation (DWV)

Geberit 115.788.GH.2 reservdel för spolarmatur Spolplatta Krom

Geberit 21226 vattenslangstillbehör Slanganslutning Kol, Stål 1 styck

For reduction from 1. 1/2 x 1.1/4 white alpine

Geberit Mepla coupling: d=32mm

Geberit 115.884.SI.1 reservdel för spolarmatur Spolplatta Vit, Krom

Geberit 390.502.14.1 vattenförsörjningsrör och slang för allmänt bruk

With union nut: d40mm G1 1/2 white alpine

[617500210]

For wall mounted.Dual flushLow-noiseCistern fully insulated against condensationFlush pipe connection with compression jointLow-levelWater supply connection, left/right or rear centre

Pakning geberit unifill svømme

The Geberit Mapress electro-galvanized press fitting system can be used for joining pipes in closed hot and cold water systems as well as sprinkler systems, fire-fighting water pipes and compressed air networks. Mapress electro-galvanized fittings are made of unalloyed steel. The press joining of pipes and fittings must be carried out with press jaws with an M-profile. When pressing, the pipe is inserted into the press fitting to the marked insertion depth and is thus pressed together.

Please note that Geberit Mapress pipes should be cut to size with a regular pipe cutter before use, and then deburred both inside and outside with a suitable deburring tool. Cutting and deburring are important precisely to avoid damage to the O-ring when the pipe is inserted into the press fitting.

Geberit electrofusion tape for anchor point: d=75mm, d1=83mm

Accessories for PEH drain pipe for welding: With 2 positions. too common. and fixed point suspension.

Geberit pipe bracket with threaded socket G 1/2, adjustable: di=50mm, di1=58mm

Pieces of PEH for welding, are used for wastewater installations. With TPE sound attenuation.