Tilta Foto & Video Tillbehör - sita 3

For Sony ZV-E10 II

This Manfrotto-compatible quick release plate attaches directly to the bottom of the Tiltaing camera cages to allow you to quickly and easily attach and detach from Manfrotto support systems.

Using two included screws, this compact black Manfrotto Quick Release Plate attaches to the bottom of Tilta full camera cage for the Sony a7C mirrorless camera. The cage can then be mounted directly on tripod heads, ball heads, and other supports that accept Manfrotto-compatible camera plates.

Note: This quick release plate is not compatible with the Tilta 15mm LWS Baseplate.

This camera cage provides complete protective armor for the Z CAM E2, E2C, E2G camera bodies. It provides several 1/4”-20 and 3/8”-16 mounting points as well as two Arri rosette mounting points and one cold shoe mounting point. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

Tilta TGA-RCK tillbehör till videostabilisator Fjärrkontrollskit Svart Aluminium, Stål 1 styck DJI RS2, RS3 Pro

These cables for the Nucleus-M give you run/stop capabilities in camera systems that support it. Simply plug the 7-pin end of the cable into one of the motors and the other end into the R/S port of the camera.

Note that this cable was specifically designed for the Nucleus-M so the R/S function only works with the Nucleus-M’s own hand unit and hand grips.

Weight: 0.09lbs
Length: 68.6cm
Color: Black
Materials: Copper, rubber, aluminum-alloy

Sony’s long awaited, flagship mirrorless video/photo camera, the A7sIII, has finally arrived. Made specifically for video content creators that demand excellent low light performance, numerous recording options, and long recording times, the new A7sIII builds upon the legacy of the A7sII to deliver a camera that hits all the right spots for a camera of this level.

Inspired by the usefulness and ingenuity of this camera’s design, Tilta set off to incorporate new design touches that help elevate the camera even further. As part of the Tiltaing series of products, Tilta has put together a versatile, yet lightweight camera cage that is just the beginning for building a camera rig for professional video. The new camera cage is designed to augment and protect the a7sIII, as well as add expansion options like our new rotating top handle, rotating side handles, ARRI standard rosette mounts, and much more.

Tilta HDA-T02-A-V kameramonteringstillbehör Lyftdon

Camera Cage for Blackmagic PYXIS 6K

Khronos Adjustable Handle Space Grey

This 60g counterweight can be used in conjunction with the Side Arm Counterweight Clamp and/or the Quick Release Baseplate Counterweight Adapter to provide additional weight if needed when balancing your camera setup on the gimbal.

This camera cage provides complete protective armor for the Fujifilm X-T3 and X-T4 cameras.

It provides several 1/4”-20 mounting points as well as two cold shoe mounting points.

The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the Fujifilm X-T3/X-T4 cage includes: the base Fujifilm X-T3/X-T4 cage, quick release top handle, Arca and Manfrotto quick release baseplates, as well as a clamp to attach an HDMI cable comfortably to the cage (one specifically for the X-T3 and one for the X-T4).

Compatible with Type II Baseplates and Type I Side Handles.

- Top Plate with Shoe Mount
- Proprietary QR Baseplate Adapter
- 4 x Rosette Mounts
- 1/4"-20 and 3/8"-16 Threads

Tilta Nucleus-M Wireless Lens Control System Partial Kit III
The Tilta Nucleus-M Wireless Lens Control System Partial Kit III contains the essential elements for pulling focus wirelessly while handholding. The kit includes the Nucleus-M left handgrip controller, one Nucleus-M motor, one removable lens belt, two motor power cables, and a battery charger unit (batteries not included). The handgrip controller provides wireless fingertip lens control while functioning as handgrip support for your camera rig, and the system enables pulling either focus, iris, or zoom on your lens. If you are using a lens that does not have standard cine-style gears, then use the included lens belt to add gears to your lens.

This partial kit is a single axis system, but the Nucleus-M left handgrip controller will allow you to control additional motors (not included) so you can control more than one lens ring. The included motor power cables allow you to power a motor from either a D-Tap power source or a second motor via the 7-pin to 7-pin connector. The included power cables allow you to easily add a second motor (not included) to the system. The included rosettes aid in mounting the handgrip controller to your camera or rig with ARRI-style rosettes. The system can wirelessly pull focus from up to 1000' away, and with separately available batteries you can power the hand unit for approximately 10 hours on a single charge.

The Tilta 12" Threaded Aluminum 15mm Rod in gray is designed for use with camera rigs and other professional filming equipment. Its sturdy aluminum construction ensures durability while the threaded design allows for easy attachment to various camera accessories.

The Tilta 15x300mm Rod in black is designed for professional camera rigs, offering a durable and versatile solution for mounting various camera accessories. Made from high-quality materials, it ensures long-lasting performance while providing a secure and stable connection for your equipment.

Tilta MB-T16-RCF kamerafiltertillbehör

The Tilta 4" Threaded Aluminum 15mm Rod in gray is perfect for compact and versatile setups. Made from durable aluminum, this rod offers a secure and stable solution for mounting camera accessories. The threaded ends ensure a tight and reliable fit for various equipment.

Tilta GSS-T01-RSB kameramonteringstillbehör Monitorfäste

Mirage Pro Matte Box VND Kit

Tilta TGA-TMC kameramonteringstillbehör Monteringsklämma

Tilta WLC-T04-CBP-BMP kameramonteringstillbehör Monteringsplatta

Tilta MB-T16-VND kamerafiltertillbehör

- These cables for the Nucleus-M give you run/stop capabilities in camera systems that support it. Simply plug the 7-pin end of the cable into one of the motors and the other end into the R/S port of the camera.
- Note that this cable was specifically designed for the Nucleus-M so the R/S function only works with the Nucleus-M’s own hand unit and hand grips.

Packing List
(1) 68.6cm cable
(1) Male connection
(1) 7-pin Male connection

Technical Data
Weight: 40g
Length: 68.6cm
Color: Black
Materials: Copper, rubber, aluminum-alloy

Tilta TA-LSP8-B kameramonteringstillbehör Handtag