Förare, Spolar & Transformatorer

Product features • Line frequency: 50...60 Hz • RI suppression: to EN 55015 (A1: 2007)/CISPR 15, EN 55022 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 • Safety: to EN 61347 • Electrical isolation between the primary side and the secondary side • Short-circuit protection, overload protection, overtemperature protection: electronically reversible • Switching between electronic transformer and lamp not permitted Product benefits • Dimmable on the leading edge and trailing edge • Very low power loss thanks to high efficiency • Strain relief suitable for different cable types (HTM) • Suitable for space-critical installation thanks to compact functional design • Extremely compact transformer for highly space-critical installation conditions (HTN) • Protective operation throughout the entire partial-load range for long lamp life Areas of application • Effect and accent lighting • Living rooms • Object lighting • Conference rooms • Restaurants • Recessed and surface-mounted furniture fixtures • Shop lighting • Event rooms

Snappy LED power supply, 20W, 12Vdc, Ip20Super slim LED driver.

An energy-efficient solutionHF-Performer III TL5 is a slim and high-frequency electronic ballast for TL5 and TL5 Eco fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features • Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp • Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections • The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Product Benefits • Optimal savings can be achieved using HF-PIII together with TL5 ECO lamps (system solution). • The programmed start enables the lamp to be switched on and off without reducing useful lamp life. • DC emergency operation in line with IEC/EN 60598-22 luminaire norms • Suitable for luminaires in protection class I and, after testing, class IIApplications • Used with movement-detection control systems like Philips OccuPlus • Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools • Class I outdoor applications, e. g. industrial premises and parking lot

Snappy LED power supply, 15W, 12Vdc, Ip20Super slim LED driver.

An energy-efficient solutionHF-Performer III TL5 is a slim and high-frequency electronic ballast for TL5 and TL5 Eco fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features • Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp • Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections • The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Product Benefits • Optimal savings can be achieved using HF-PIII together with TL5 ECO lamps (system solution). • The programmed start enables the lamp to be switched on and off without reducing useful lamp life. • DC emergency operation in line with IEC/EN 60598-22 luminaire norms • Suitable for luminaires in protection class I and, after testing, class IIApplications • Used with movement-detection control systems like Philips OccuPlus • Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools • Class I outdoor applications, e. g. industrial premises and parking lot

HF-Regulator II for TL-D lamps – Dimming: a next step in energy savingHigh-frequency electronic dimming ballast, using the analog protocol (1-10 V) for TL-D lampsProduct Benefits • The lamp power can be dimmed from 1 to 100% via the Analog control input (in accordance with the 1-10 V industry standard) • Compliant with European and Asian norms and suitable for emergency lighting systems • HF operation improves light quality, lamp lifetime • Combined with controls, additional energy savings can be achievedProduct Features • Programmed start: flicker-free ignition < 0.5 seconds and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life • Smart power ensures constant light, independent of mains fluctuations. • Up to 60% reduction in energy consumption by using automatic lighting control systems • Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacementApplications • Indoor, general and task lighting applications in combination with lighting control systems (personal control, daylight linking and/or movement detection)

This driver series is dimmable with the current dimmerson the market.Driver comes incl. distributor box with 6 outputs.Driver series comes in 9W, 18W and 25W.

Electronic LED transformer 0-70W

Product features • Line frequency: 50...60 Hz • RI suppression: to EN 55015 (A1: 2007)/CISPR 15, EN 55022 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 • Safety: to EN 61347 • Electrical isolation between the primary side and the secondary side • Short-circuit protection, overload protection, overtemperature protection: electronically reversible • Switching between electronic transformer and lamp not permitted Product benefits • Dimmable on the leading edge and trailing edge • Very low power loss thanks to high efficiency • Strain relief suitable for different cable types (HTM) • Suitable for space-critical installation thanks to compact functional design • Extremely compact transformer for highly space-critical installation conditions (HTN) • Protective operation throughout the entire partial-load range for long lamp life Areas of application • Effect and accent lighting • Living rooms • Object lighting • Conference rooms • Restaurants • Recessed and surface-mounted furniture fixtures • Shop lighting • Event rooms

Product features • Line frequency: 50...60 Hz • RI suppression: to EN 55015 (A1: 2007)/CISPR 15, EN 55022 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 • Safety: to EN 61347 • Electrical isolation between the primary side and the secondary side • Short-circuit protection, overload protection, overtemperature protection: electronically reversible • Switching between electronic transformer and lamp not permitted Product benefits • Dimmable on the leading edge and trailing edge • Very low power loss thanks to high efficiency • Strain relief suitable for different cable types (HTM) • Suitable for space-critical installation thanks to compact functional design • Extremely compact transformer for highly space-critical installation conditions (HTN) • Protective operation throughout the entire partial-load range for long lamp life Areas of application • Effect and accent lighting • Living rooms • Object lighting • Conference rooms • Restaurants • Recessed and surface-mounted furniture fixtures • Shop lighting • Event rooms

DRIVRUTIN 30W DIM. MED MONTERINGSBOX OCH PLUGG

Snappy LED power supply - 350 mA, 6W, Ip20Super slim LED driver.

Mean Well LED power supply, 320W, 24Vdc and IP67.LED driver is suitable for both indoor and outdoor use and wet rooms due. IP protection class is 67.

20W driver for LED track with 3000 mm cable and sockets.1-10V dimming.Impulse dimming.NB! Not phase dimming.SG provides 5 year system warranty on the product, which is effective from commissioning.

An energy-efficient solutionHF-Performer III TL5 is a slim and high-frequency electronic ballast for TL5 and TL5 Eco fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features • Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp • Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections • The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Product Benefits • Optimal savings can be achieved using HF-PIII together with TL5 ECO lamps (system solution). • The programmed start enables the lamp to be switched on and off without reducing useful lamp life. • DC emergency operation in line with IEC/EN 60598-22 luminaire norms • Suitable for luminaires in protection class I and, after testing, class IIApplications • Used with movement-detection control systems like Philips OccuPlus • Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools • Class I outdoor applications, e. g. industrial premises and parking lot

• LED drivers for mini downlights (350mA), 6 outputs
• Built-in thermofuse with auto reset
• Quick and easy installation
• Can be fastened by screws
• Do NOT plug in any LED lamps, when connected to power

• LED driver for cabinet lighting and mini downlights (350mA), 6 outputs
• Dimmable – leading or trailing edge
• Built-in thermofuse with auto reset
• Quick and easy installation
• Can be fastened by screws
• Do NOT plug in any LED lamps, when connected to power

Electronic ballast for HF-spole til 2x14, 21, 28, 35S T5

HiluX D1 Gen3 LED Driver 1-4 Spot - Dimmable

Upgrade your lighting system with the HiluX D1 Gen3 LED Driver, designed to efficiently drive between 1 and 4 LED spots. This 12W, 12V DC driver is not only powerful, but also flexible with its dimming function, which allows adjusting the light intensity to create the perfect atmosphere in any room.

An energy-efficient solutionHF-Performer III TL5 is a slim and high-frequency electronic ballast for TL5 and TL5 Eco fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features • Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp • Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections • The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Product Benefits • Optimal savings can be achieved using HF-PIII together with TL5 ECO lamps (system solution). • The programmed start enables the lamp to be switched on and off without reducing useful lamp life. • DC emergency operation in line with IEC/EN 60598-22 luminaire norms • Suitable for luminaires in protection class I and, after testing, class IIApplications • Used with movement-detection control systems like Philips OccuPlus • Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools • Class I outdoor applications, e. g. industrial premises and parking lot

Inverter series is distinguished by it can be delivered in 2 different mounting compact or book form as required very high motor control in open loop

PrimaVision Power (100 W & 150 W) for CDM - High power packed in a small sizePrimaVision Power gear is designed for optimal performance of 100 and 150 W CDM lamps – ideal where high-intensity light is key. Product Benefits • Optimal lamp performance thanks to minimal lamp power tolerance • Lamp life increased by up to 30% for CDM lamps • Eliminates all visible lamp flicker Product features • Loop Through feature (in independent version) • Low gear energy losses • Lamp end-of-life detection • High Tambient and Tcase temperatures • Long lifetime of 40,000 hours Applications • 100 and 150 W: high-bay area, accent and decorative lighting for shops, public spaces, lobbies and offices • Suitable for indoor use only

Snappy LED power supply, 320W, 24Vdc and IP20.LED driver.

HF-Regulator II for TL-D lamps – Dimming: a next step in energy savingHigh-frequency electronic dimming ballast, using the analog protocol (1-10 V) for TL-D lampsProduct Benefits • The lamp power can be dimmed from 1 to 100% via the Analog control input (in accordance with the 1-10 V industry standard) • Compliant with European and Asian norms and suitable for emergency lighting systems • HF operation improves light quality, lamp lifetime • Combined with controls, additional energy savings can be achievedProduct Features • Programmed start: flicker-free ignition < 0.5 seconds and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life • Smart power ensures constant light, independent of mains fluctuations. • Up to 60% reduction in energy consumption by using automatic lighting control systems • Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacementApplications • Indoor, general and task lighting applications in combination with lighting control systems (personal control, daylight linking and/or movement detection)

Dimming the next step in energy savingThis intelligent high-frequency electronic dimming ballast utilizes the DALI or Touch and Dim push-button protocol for fluorescent lamps. It meets A1BAT requirements, thereby pre-empting upcoming legislation. With a special command you can retrieve the system’s mains power consumption, and with another you can find out which lamp wattage is connected. Combined with controls, additional energy savings can be achieved. Product Benefits • Extremely low stand-by losses, controlled cut-off for dim levels above 80%, hybrid control dimming (current control at 100% and power control at 1%) – combined with MASTER TL5 Eco the most energy-efficient solution • HF operation improves light quality and lamp lifetime. • Compliant with European and Asian norms and suitable for emergency lighting systemsProduct Features • HF-R Intelligent recognizes what type of lamp (T5 HE, HO, ECO, TL-D, PL-L) is connected and drives it accordingly • Programmed start: flicker-free ignition < 1.0 second and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life • Smart power ensures constant light, independent of mains fluctuations and dimming from 1 to 100% • Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacement • Programmable for intelligent functionalities via Philips MultiOne: Corridor mode, Emergency DC dim level, Burn-in timeEnvironment • The HF-R intelligent will recognize which lamp is connected and will drive it accordingly • Extremely low energy consumption in stand-by (0.25 W) • Optimized for MASTER TL5 Eco lamps • RoHS and ISO 14000-compliant • EEI = A1 BAT (Best available technology)Application • Indoor, general and task lighting applications in combination with lighting control systems (personal con