FNIRSI 2C53T is a multifunctional portable device that combines a digital oscilloscope, multimeter, and signal generator in one compact housing. The dual-channel 50 MHz oscilloscope with 250 MSa/s sampling rate ensures precise waveform analysis, while the built-in multimeter supports a wide range of electrical measurements up to 19999 counts. A 2.8-inch color display, advanced trigger modes, and a rugged ABS housing make the device suitable for workshop, laboratory, and field diagnostics. The integrated 50 kHz signal generator and rechargeable 3000 mAh battery further enhance its versatility for electronics testing and troubleshooting.

FNIRSI SG-003A is a compact portable signal generator designed for precise testing, calibration, and diagnostic tasks in industrial and field environments. It offers measurement accuracy of ≤0.2% and delivers near-instant readings in approximately one second, supporting efficient workflow during troubleshooting. The device features a 2.4-inch HD display with adjustable brightness, ensuring clear visibility in different lighting conditions, while color-coded operating modes improve usability. Weighing only 165 g and measuring 112 × 82 × 27 mm, it is highly portable for toolkits or field use. It supports multiple signal modes, including current and voltage testing, actuator control, speed simulation, and inverter diagnostics, with real-time curve monitoring for signal analysis.

The FNIRSI DWS-200 F soldering station is a high-performance 200 W system designed for precision soldering in professional and technical environments. It features rapid heating within 1 second and efficient heat transfer for fast operation, supported by a PID-controlled temperature range from 100°C to 450°C. A 2.8-inch TFT color display provides real-time temperature monitoring with multiple viewing modes. The station includes preset temperature profiles for quick adjustments and an induction standby function that activates sleep mode when idle. Anti-static and short-circuit protection ensure safe operation, while compatibility with F210 and F245 handles supports flexible use.

The FNIRSI S1 is a digital multimeter designed for accurate and versatile electrical measurements in both professional and DIY environments. It supports AC/DC voltage measurement, resistance, continuity testing, frequency detection, battery capacity measurement and temperature reading. Additional functions include NCV (non-contact voltage detection), diode testing, phase and neutral wire identification and True RMS measurement for more accurate readings of non-linear signals. The device features a clear inverted VA HD display for easy readability, along with automatic range selection, data hold and overload protection. A built-in 1000 mAh rechargeable battery with USB-C charging ensures convenient and portable operation.

FNIRSI GC-01 strålningsdetektor

The FNIRSI SWM-10 is a portable 2-in-1 spot welder with integrated powerbank functionality, designed for precise battery assembly and repair work. It delivers up to 1200 A peak output using dual-pulse welding technology, improving weld quality by cleaning the surface before applying the main pulse. The device is powered by a 5000 mAh lithium battery and supports USB output for charging external devices. A 1.8-inch TFT display provides real-time monitoring of key parameters such as voltage, pulse time and weld count. Its compact design and safety protections make it suitable for professional and workshop use.

FNIRSI FNB58 BT USB Port Tester with Bluetooth is an advanced diagnostic tool designed for monitoring USB power delivery, charging performance, and cable quality. It supports a wide range of fast-charging protocols, including PD 3.1, PPS, QC, SCP, AFC, and SuperVOOC, making it suitable for testing modern chargers and mobile devices. The high-resolution display provides real-time measurements of voltage, current, power, and charging behavior with exceptional precision. Bluetooth connectivity, offline data logging, and cable diagnostics make the FNB58 BT an ideal solution for technicians, electronics enthusiasts, and users who want detailed insight into charging performance.

100 W smart lödkolv med FNIRSI HS-02B verktygssats

FNIRSI HS-02 är en smart lödkolv av ny generation som kombinerar 100 W effekt, snabb uppvärmning, precis temperaturreglering och enastående mobilitet. Stöd för PD-, QC- och DC-strömförsörjning (9–20 V), adaptiv effektstyrning, en 0,96" IPS-färgskärm, ESD-skydd och automatiska funktioner gör den till ett verktyg som är redo att användas både vid elektronikservice och ute på fältet. Denna utrustning är utformad för personer som förväntar sig maximal prestanda utan kompromisser.

The FNIRSI FNAC-28 is a compact 2-in-1 USB tester with USB-A and USB-C support, designed for measuring voltage, current and power in chargers, cables and powerbanks. It features dual input ports for flexible testing and supports loads up to 6.5 A with bi-directional USB-C power measurement. A color OLED display provides real-time data with intuitive navigation. The device automatically detects major fast-charging protocols and supports cable testing, resistance measurement and load simulation. Built-in data logging and battery capacity testing functions make it suitable for diagnostics, testing and performance evaluation.

FNIRSI DST-210 oscilloskop 10 MHz 48 MS/s Handhållen Oscilloskop för digital sampling

FNIRSI 2C23T is a compact 3-in-1 portable measuring device that combines a dual-channel oscilloscope, precision multimeter, and signal generator in one lightweight housing. Equipped with a 10 MHz oscilloscope, 50 MS/s sampling rate, and a built-in signal generator with frequencies up to 2 MHz, it is ideal for electronics diagnostics, circuit testing, and field measurements. The 2.8-inch color display ensures clear waveform visualization, while the 3000 mAh rechargeable battery provides up to 8 hours of operation. Its durable ABS housing with silicone protection makes it suitable for both workshop and mobile use.

FNIRSI SAG-55 är en smart varmluftspistol avsedd för precisionsarbete inom elektronik, SMD-reparationer samt krävande användare både privat och professionellt. Med en effekt på 550 W, ett brett temperaturintervall på 100–450 °C, upp till 20 nivåer för luftflödesjustering, ett intelligent säkerhetssystem, snabb uppvärmning och nedkylning, en färg-LCD-skärm och smarta automatiska funktioner sätter detta verktyg en ny standard för komfort, kontroll och säkerhet på arbetsplatsen.

The FNIRSI DSO-TC4 is a portable 3-in-1 instrument combining a digital oscilloscope, electronic component tester and signal generator in a compact handheld design. It is intended for electronics diagnostics, service work and educational use, where multiple measurement functions are required in a single device. The oscilloscope supports a 10 MHz bandwidth with a 48 MSa/s sampling rate, enabling real-time waveform analysis with sufficient detail for general signal inspection. The integrated signal generator provides 13 predefined waveforms with frequency output up to 50 kHz and adjustable amplitude, allowing simulation of circuit behaviour. The component tester automatically identifies and evaluates diodes, transistors, MOSFETs, resistors and capacitors for rapid fault detection. A 2.8-inch TFT display ensures clear visualization of results, while the 1500 mAh rechargeable battery with USB-C charging supports extended portable operation.

The FNIRSI 1013D is a 7" portable touchscreen oscilloscope with 2 channels, 100 MHz bandwidth, and 1 GSa/s sampling rate. It features an 800x480 TFT display, automatic one-button signal adjustment, and waveform recording for fast, precise measurements. The built-in 6,000 mAh battery provides around 4 hours of operation. Suitable for electronics repair, workshop use, and DIY projects, it supports analog and digital signal analysis, offering convenience and portability wherever needed.

The FNIRSI 2C53P is a portable 3-in-1 measurement device combining a dual-channel oscilloscope, digital multimeter and DDS signal generator in a compact handheld format. It features a 4.3-inch IPS touchscreen with 480×272 resolution for intuitive control and clear waveform display. The oscilloscope offers 50 MHz bandwidth and 250 MSa/s sampling for accurate signal analysis, while the multimeter supports high-precision 19999-count measurements across voltage, current, resistance, capacitance and temperature. A 4000 mAh battery enables portable operation, making it suitable for field, workshop and laboratory use.

The FNIRSI DSO152 is a compact portable oscilloscope with a 2.8" display, 2.5MS/s sampling rate, 200kHz bandwidth, and ±400V measurement capability. Despite its small size (99 × 68.3 × 19.5 mm), it features automatic parameter settings, a built-in 1,000mAh battery, and a 1kHz test signal source for probe calibration. Lightweight and easy to carry, it is ideal for mobile service, workshop, and educational applications, providing accurate, convenient measurements in a pocket-sized device.

The FNIRSI SG-004A is a compact mini signal generator offering professional functionality in a pocket-sized design. It features a 2.4-inch HD backlit display, adjustable brightness, real-time curve viewing, and multi-mode operation. With ≤0.2% measurement accuracy, drop protection, USB-C charging, and up to 24 hours standby, it is ideal for field engineers, technicians, and electronics enthusiasts. The device supports a wide range of signal types and testing tasks, including voltage/current testing, speed simulation, actuator adjustment, and inverter diagnostics, providing reliable and portable performance wherever you need it.

The FNIRSI 1014D 2-in-1 oscilloscope signal generator is a compact digital measurement instrument designed for electronics diagnostics, development, education and repair applications. It integrates a dual-channel oscilloscope with a built-in DDS signal generator, enabling both waveform analysis and signal output within a single device. The oscilloscope provides 100 MHz bandwidth with 1GSa/s sampling and 1 MΩ input impedance for accurate signal capture. A 7-inch 800×480 TFT display ensures clear waveform visualization. Advanced functions include FFT analysis, X-Y mode, auto measurement and cursor tools. Internal memory supports storage of up to 1,000 waveforms and screenshots, with USB export for external processing and documentation. The device supports stable operation across a wide range of electronic testing scenarios.

The FNIRSI DSO153 is a compact 2-in-1 device combining an oscilloscope and signal generator in a pocket-sized design. It features a 1,000 mAh battery, USB-C charging, automatic parameter adjustment, and supports 8 languages. The device offers advanced waveform analysis, measurement of 8 signal parameters, 1 kHz calibration signal, and intelligent overload protection. Lightweight and easy to operate, it is ideal for electronics engineers, DIYers, teachers, and service technicians, providing accurate and versatile performance for fieldwork, workshops, and educational applications.

The FNIRSI IR40 is a compact laser rangefinder designed for fast and accurate distance measurement up to 40 meters with ±2 mm precision. It delivers results in 0.1 seconds and supports multiple measurement modes including length, area, volume and Pythagorean calculations. A 1.3-inch IPS display with automatic gravity-based rotation ensures clear readability in any orientation. The device also connects to a mobile app for data sync, measurements and plan creation. Powered by a 400 mAh rechargeable battery with USB-C charging, it supports up to 3000 measurements per charge for long-term use.

The FNIRSI NVS-40 is a digital night vision device capable of recording in 4K resolution and capturing images up to 36 MP. It enables observation in complete darkness at distances up to 300 meters using adjustable 850 nm infrared illumination and 6x digital zoom. The device features a 3-inch IPS display for live view and playback, supports two operating modes (day and night), and allows data export via USB-C. Powered by a rechargeable 18650 battery, it offers up to 8 hours of operation per charge for extended field use.

FNIRSI DPOX180H är ett handhållet digitalt fosforoscilloskop (DPO) som kombinerar ett 180 MHz-oscilloskop med två kanaler, en 20 MHz DDS-funktionsgenerator och avancerade signalanalysfunktioner. Det är utformat som ett kompakt, mobilt verktyg för service-, verkstads- och laboratoriearbete och erbjuder hög funktionalitet i en enda enhet.

FNIRSI BTM-24 – multifunktionell batteritestare för bilar

FNIRSI BTM-24 är en avancerad men samtidigt extremt lättanvänd batteritestare för 12 V och 24 V som ersätter flera olika diagnostikverktyg. Med en enda mätning kan du kontrollera spänningen, startströmmen upp till 2000 A CCA, laddningsstatus (SOC), hälsostatus (SOH), inre resistans samt att generatorn och laddningssystemet fungerar korrekt. Det ger ett snabbt och tydligt svar på frågan:fungerar batteriet som det ska, eller närmar det sig slutet av sin livslängd?

FNIRSI FDM-02 ljudnivåmätare

FNIRSI FDM-02 är en precisionsljudnivåmätare utrustad med en färgskärm och en högkvalitativ kondensatormikrofon, vilket möjliggör noggranna mätningar av ljudnivåer i olika arbetsmiljöer. Den stöder A/C-frekvensviktning, FAST/SLOW-lägen och en dataloggningsfunktion som genererar grafer. Dessutom kan du övervaka omgivningstemperatur och luftfuktighet. Allt detta gör enheten idealisk för professionella akustiska mätningar, övervakning av arbetsförhållanden och mycket mer.

The FNIRSI WMT-10 is a non invasive moisture meter designed for fast and accurate measurement of material humidity without damaging surfaces. It uses induction based sensing technology to measure moisture in wood, walls, floors and construction materials. The device offers four dedicated modes for softwood, hardwood, masonry and powder wall surfaces, covering a measurement range up to 75 percent with a resolution of 0.1 percent. A 2.4 inch TFT color display ensures clear readability, while a built in flashlight supports use in low light environments. The 1000 mAh rechargeable battery with USB C charging provides long operating time and convenience.