Dräneringsprodukter - sita 12

The set consists of a panel, rail, heightener set and screws. The set must be assembled before installation.

Includes 2 x hooks to be used for lifting the panel.

The panel solution is placed directly inside the drain unit.

The rail is specially designed to provide a snug fit. Installed with HighLine frame.

The heightener set to adjust the panel is included, so that the panel can be matched to the frame height.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Reductions for HT PP

Ø 32-mm horizontal drain.

Excluding odour barrier/water trap.

Can be turned in all directions, to simplify pipework.

Cannot be used with any type of water trap. Can only be used as a secondary drain.

ClassicLine corner drain kit - vertical Ø 75, Column, H 10 mm. The drain kit is the simple solution that contains all the necessary parts for a unidrain® ClassicLine system. The solution is composed of the best-selling products, which can therefore meet the needs of most bathrooms. The solution is available in lengths of 700, 800, 900 and 1000 mm and as a corner solution, and includes: ClassicLine grate (Column), ClassicLine frame (H 10 mm), wooden slats, drainage fixture (1004 with back flange) and outlet housing (Ø75mm vertical incl. trap).

The Wafix PP system is made from the reusable PP (Polypropylene), which gives both pipes and fittings good physical and chemical properties. The PP material used has a high E-module, which gives the pipes a good length stiffness and a great impact strength. Therefore, the Wafix PP system withstands the impacts and shocks that can occur during installation and operation - even at minus degrees. Wafix PP is a complete drainage system with pipes and fittings in the dimensions: Ø32 mm Ø40 mm Ø50 mm Ø50 mm Ø75 mm Ø110 mm The program also comes in a white version in dimensions Ø32, Ø40 and Ø50 mm, especially suitable for visible installations. The system's unique Fix·lock® sealing ring seals on as many as three points, providing a large construction surface against the pipe and ensuring that your joints are 100% dense each time. It provides extra security and security if you insert or hide the pipes in a shaft.

AMAX Pro, is a drain in PP for drainage systems in buildings for transporting sewage.

AMAX Pro, is a drain in PP for drainage systems in buildings for transporting sewage.

AMAX Pro, is a drain in PP for drainage systems in buildings for transporting sewage.

AMAX Pro, is a drain in PP for drainage systems in buildings for transporting sewage.

AMAX Pro, is a drain in PP for drainage systems in buildings for transporting sewage.

AMAX Pro, is a drain in PP for drainage systems in buildings for transporting sewage.

AMAX Pro, is a drain in PP for drainage systems in buildings for transporting sewage.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Can be freely positioned against the back wall, independent of any side walls.

The drain unit has one wall flange.

For shower cubicles with open right-hand side, glass screen or similar.

The drain unit has two wall flanges.

For shower cubicles with open right-hand side, glass screen or similar.

The drain unit has two wall flanges.

For Shower cubicles with three fixed walls.

The drain unit has three wall flanges.

Sheeting, punched: 12l/s

Membrane JO

PURUS MultiFlex Ø75 mm horizontal outlet, w / water lock, flange for membrane and grate / frame, with height, lower, tilt 0-4 degrees, and rotatable flange. For concrete floor, 3 side inlets, made in PP-PlastVA-Approved

Transition from Jo-Flex 11/4 nipple to 40 mm.

MAGE DUO couplings for cast iron pipe, sewage use. Body in chrome-nickel steel. Rubber in EPDM. Not for pressure system. Temp max. 80°. Not for installation in ground. 2 screws to mount.