Wear it on your wrist or mount it to the handlebar to remotely control when recording starts. Record data with the built-in GPS and integrate the data into your video in the DJI Mimo app to make your videos pop.

Monteringsadapter, adjustable, quick-release

During your ride, the DJI Power 1kW Super Fast Car Charger can utilise the excess electricity from the car's alternator to quickly recharge the Power 1000 and expansion battery at up to 1000 W, reaching 1024 Wh of power during a drive of approximately 78 minutes, expanding the capacity of your car's electrical system. It can also connect to the car battery and reverse-charge it with Power 1000 to prevent battery drain, achieving intelligent two-way charging and capacity expansion of the car battery.

This cable allows you to connect the DJI Power 1.8kW Solar/Car Super Fast Charger directly to a car battery, enabling fast and efficient charging via 12V or 24V vehicle systems. It's ideal for mobile or off-grid use where quick charging is needed. Please note that the input voltage of the car charging terminals must not exceed 45 volts.

The package includes a 5-meter 45A car charging cable, a fuse box, a 60A fuse, and three M2.5 hex socket screws. This cable is exclusively compatible with the DJI Power 1.8kW Solar/Car Super Fast Charger and provides a convenient solution for on-the-go charging.

Styrstångsmontering, för DJI Action 2, Osmo Action, Osmo Action 3, Osmo Action 3 Adventure Combo Bundle

Huvudmonterad rem för handsfree-inspelning i förstapersonsperspektiv.

DJI Osmo Magnetic Headband säkrar kameran i huvudhöjd med justerbar tilt-vinkel, vilket möjliggör immersiv POV-video utan att hindra rörelse.

Stativ, för DJI Osmo

Hållare för mobiltelefon, för DJI RS 2, RSC 2

ROMO gummirullborste

The ND filters provide experienced users with precise control over shutter speed, allowing them to produce smooth footage in bright environments with lower shutter speeds. Flexible use of this set can ensure clean footage, even when the shutter opens to 180° with a low ISO*.

PROSSD-fäste, för DJI Ronin 4D

DJI Air 3S Wide-Angle Lens

GaN-laddare DJI Power 140W GaN Charger stöder upp till 140W uteffekt med GaN-teknik, smart temperaturkontroll, dynamisk strömfördelning med 3 portar och brett stöd för snabbladdningsprotokoll.

Den kompakta designen i handflatsstorlek med fast kontakt passar smidigt i en drönarväska eller ryggsäck, medan dubbla USB-C-portar och en USB-A-port låter dig ladda upp till tre enheter samtidigt.

• Upp till 140W uteffekt vid 0° till 25°C omgivningstemperatur
• Dubbla USB-C-portar och en USB-A-port
• Stöd för PD 3.1 på USB-C och stöd för UFCS på USB-A
• Dynamisk strömfördelning prioriterar utvalda anslutna DJI-enheter
• DJI Logo-indikator visar anslutningsstatus

Utformad för DJI-utrustning, bärbara datorer, smartphones, spelkonsoler och andra kompatibla enheter hjälper den dig att hålla din uppsättning strömförsörjd med färre adaptrar.

Skydd till monitor för fjärrkontroll, för Mavic 2 Pro

USB-kabel, USB-C (hane) till USB-C (hane), för DJI Mavic Air 2

Osmo Action Multifunctional Charging Handle

It uses a unique silica gel material that is comfortable to wear and can reshape freely, allowing you to take POV footage easily.
Use scenarios: Get POV shots during fishing, travel etc.

Use caution when participating in certain extreme sports like rock climbing and diving. Ensure that no foreign objects get caught around your neck to avoid the risk of suffocation.

This magnetic mount can be used to stick the camera to smooth, flat surfaces. The adhesive base and ball-joint design allow you to stick the camera to surfaces at different angles to gain unique vantage points. Remove the adhesive base, and attach tripods, extension rods, or other third-party accessories via the 1/4 screw hole.

DJI's Remote Controller for Ronin-M is a dedicated 2.4 GHz handheld transmitter that comes pre-configured for operating the Ronin-M gimbal. With this transmitter, one operator can carry the gimbal while a second operator remotely controls the gimbal's pan, tilt, and roll, allowing for much more precise camera movements than a single operator can achieve.

This remote is designed specifically for the Ronin-M and is not compatible with the Ronin. Please ensure the remote control is sufficiently charged before use, as it will automatically power off if the battery voltage becomes too low. The internal battery should be charged using the included Micro-USB cable, and using the incorrect type of charging cable may cause damage. Always turn off the remote control before charging. The power LED indicator will glow solid green when the battery is fully charged. When using the remote, ensure the antenna is at least 7.9" away from any person.

The key features of the remote controller include an internal battery with USB charging, a power indicator light, LEDs that show the remaining battery, a carry handle, and a neck strap attachment point. The remote is also configurable and updatable with the RC Assistant software.

For controls with default settings, the right 3-position switch is used to select the mode, while the left 3-position switch is used to select the function (Fast, Normal, and Slow). The left dial is reserved, and the right joystick controls the horizontal pan axis and vertical tilt axis. The left joystick controls the roll axis with horizontal movements.

DJI

Monteringsplatta för motvikt, för DJI Ronin M, Ronin MX

Can attach to cameras flexibly and provides an optimized mounting position for the Focus Motor Rod Mount Kit.

Designed for use with: DJI RS4

1.5m Extension Rod Kit
Compact, easy to hold, and adjustable from 0.3 to 1.5 meters, this extension rod makes selfies and other creative-angle shots effortless. The 1/4" threaded hole on the bottom supports accessory expansion for more versatile uses.

Overview
The DJI Mavic 3 Fly More Kit includes two Intelligent Flight Batteries, a 100W Battery Charging Hub, a 65W Car Charger, a Convertible Carrying Bag, and Low-Noise Propellers, providing comprehensive support for your aerial photography experience at a better price than buying these items separately.


1. Intelligent Flight Battery: One Intelligent Flight Battery provides a 46-min* max flight time, allowing you to explore more of your surroundings and fly with greater peace of mind.

2. 100W Battery Charging Hub: Expands the charging interface to three. The battery charging hub enhances efficiency by charging batteries in sequence according to their remaining power level, with more fully-charged batteries receiving power first.

3. 65W Car Charger: A must-have on the go, the 65W Car Charger can charge different devices in the car. It provides a stable output power of 65 W and two output ports (USB-C and USB-A) for charging the Intelligent Flight Battery and remote controller at the same time. It also supports PPS and PD protocols to charge your smartphone, laptop, and other devices.

4. Low-Noise Propellers: Each propeller blade has been put under precise dynamic balancing tests to increase aerodynamic efficiency and output less noise.

5. Convertible Carrying Bag: This well-designed bag can be used as either a shoulder bag or a backpack to meet your needs for short trips.

Optimum Charging Efficiency
The TB51 Intelligent Battery Charging Hub provides the optimum balance between charging efficiency and storage size with its integrated, foldable design. In Fast mode, it can charge two batteries to 90% within just 35 minutes, and eight batteries to 100% in only 160 minutes. The included 65W USB-C port can be used to charge the DJI RC Plus.

Compatible with DJI TB51 Intelligent Battery.