Elegoo Rapid PLA+ Filament - Black
ELEGOO Rapid PLA+ Filament — Black, 1 kg spool (1.75 mm ±0.02 mm). A high-strength, fast-print PLA+ engineered for durability and flexibility: tensile strength ≥60 MPa and elongation up to ~19% deliver parts that resist cracking and impact far better than standard PLA. Precisely wound and vacuum-sealed with desiccant, the filament feeds cleanly to reduce jams and ensure consistent extrusion. Optimised for high-throughput printing, it supports very fast print speeds while maintaining surface quality, making it ideal for functional prototypes, jigs, display parts and larger decorative prints that require both strength and reliable dimensional accuracy.
Dimensional quality and spool handling
Manufactured to a tight diameter tolerance of 1.75 mm ±0.02 mm and evenly wound on a 1 kg spool, the filament ensures smooth feeding and predictable extrusion behavior. Each spool is delivered vacuum-sealed with a desiccant packet to reduce moisture absorption during storage and shipment — essential for preserving print quality and preventing bubbling or poor layer adhesion.
Print performance & high-speed capability
Rapid PLA+ is optimised for higher-throughput printing: its melt behavior and flow characteristics support elevated print speeds while preserving layer bonding and surface finish. Typical extrusion temperatures fall in the 200–230 °C range (start around 205 °C and tune for your machine), and a heated bed at 50–70 °C improves first-layer adhesion. Although the filament is marketed for high-speed applications (printer-dependent; some workflows report much higher head speeds), practical print speed should be tuned per model geometry and printer hardware to balance detail, resolution and mechanical strength.
Recommended settings & tips
• Nozzle: standard 0.4 mm recommended; larger nozzles (0.6–0.8 mm) may be used for very fast, coarse prints.
• Temperature: 200–230 °C (adjust in 5 °C steps); start at ~205 °C.
• Bed: 50–70 °C; use glue stick, PEI or blue tape if needed for adhesion.
• Cooling: moderate part-cooling helps surface finish; reduce cooling for large, solid parts to improve interlayer strength.
• Retraction: tune to reduce stringing at higher speeds; lower retraction distance and increased speed often suit Rapid PLA+.
• Drying: if filament shows popping or poor finish, dry spool (e.g., 40–50 °C for several hours) before printing.
Applications & compatibility
Well suited for functional prototypes, tooling, fixtures, mechanical housings, larger display pieces and multi-part assemblies where toughness and reliability are important. Works on virtually any 1.75 mm FDM printer that supports the specified temperature range. Always perform a short calibration print when changing spools or printers.
Storage & safety
Keep the spool sealed when not in use; store in a dry place with desiccant to maintain optimal print performance. Avoid ingesting or prolonged skin contact with heated polymer extrudate. Dispose of material per local regulations.
Package contents
• 1 × 1 kg vacuum-sealed spool ELEGOO Rapid PLA+ (Black), desiccant included.
Ovanstående information och specifikationer är vägledande och kan utan förvarning ändras av producenten. Alla uppgifter lämnas med reservation för tryckfel, och bilder är vägledande. Vissa texter kan vara autogenererade eller maskinöversatta och kan därför ge texter som kan vara missvisande.