Rems Verktyg för VVS-arbete

Rems Press ring M 22 S (PR-2B)

REMS pressing ringsHigh compression pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing segments manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

1 757,00 kr (1 405,60 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers Mini G 26

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.

2 319,00 kr (1 855,20 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Blade for pipe cutters ROS P26/SW 35

Specially hardened and specially ground blade, exchangeable, PTFE-coated.German quality product

694,00 kr (555,20 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Amigo 2 electric clamp R 1/2-2"

Powerful, easy-to-operate electric tool for threading with unique, patented support bracket. Ready for use anywhere, without vice. Ideal for repair, renovation, job site.Pipe threads 1/8–2, 16–50 mm. Bolt threads 6–30 mm, 1/4–1. Pipe threads with REMS 4 automatic die head 2 1/2–4.REMS Amigo 2 – extremely strong up to 2.Set incudes Die heads R 1/2 - 3/4 - 1 - 1.1/4 - 1.1/2 - 2

16 801,00 kr (13 440,80 kr)

Beställningsvara - leveranstid kan ej upplysas

Rems Crimping pliers Mini up 20

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

2 268,00 kr (1 814,40 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers Mini M35 - 578390

REMS pressing tongs MiniVery compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs/pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing tongs/pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.

1 893,00 kr (1 514,40 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Intermediate Pliers Mini Z8

Adapter tongs Mini Z8for driving REMS pressing rings S & 45° (PR-2B)

1 950,00 kr (1 560,00 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers Mini RN26 578440

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948). High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer. Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process. With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

2 427,00 kr (1 941,60 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers M15 570110

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

1 709,00 kr (1 367,20 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Pipe scissors ROS P 42 S

Handy quality tools for clean, fast pipe cuts. For thin-walled pipes also. Sturdy aluminium design. For single-hand operation.Plastic pipes, multi-layer composite tubes Ø 42 mm Ø 158

1 121,00 kr (896,80 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers Mini BMP 5/8"

High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.

2 524,00 kr (2 019,20 kr)

Beställningsvara - leveranstid kan ej upplysas

Rems Press ring M 76.1 XL (PR-3S)

REMS pressing ringsHigh compression pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing segments manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

16 467,00 kr (13 173,60 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Electric pressure test pump E-Push 2

Powerful, electric pressure testing pump for pressure and tightness tests of piping systems and receptacles. Testing and pressure range p 60 bar/6 MPa/870 psi. Pumping capacity 6.5 l/min water, hydrous solutions, emulsions, ph-value of liquids 7-10, temperature of liquids 60°C, viscosity of liquids 1.5 mPa s.REMS E-Push 2 – electric charging and testing. Up to 60 bar. With adjustable pressure limiting. 1300 W. Self sucking.

10 099,00 kr (8 079,20 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Pipe support herkules 3B

Height-adjustable material support with ball guide for rotating and stationary pipe and rod material. For crafts and industry. For construction sites and workshops. Pipe Ø (1/8) 1 – 6", Ø (6) 25 – 150 mm. Rod material Ø (6) 25 – 150 mm REMS Herkules – the strong support.

4 427,00 kr (3 541,60 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Press ring M 15 S (PR-2B)

REMS pressing ringsHigh compression pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing segments manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

1 739,00 kr (1 391,20 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Intermediate pliers Z6 for press rings XL (PR-3S)

For driving REMS pressing rings XL (PR-3S)

5 375,00 kr (4 300,00 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers Mini TH20 578358

High compression pressing tongs/pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing tongs/pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC & REMS Mini-Press 22V ACC drive units. Read and follow the installation and assembly instructions of the system provider/manufacturer.

2 197,00 kr (1 757,60 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Mini-Press S 22V ACC Basic-Pack

Universal, super handy electric tool with automatic circuit control for producing pipe pressing joints for all common pressfitting systems. For battery and corded operation. Pipe pressing joints Ø 10–40 mm, 3/8 - 1 1/4. REMS pressing tongs Mini.REMS Mini-Press ACC – universal up to Ø 40 mm / 1 1/4. Super light, super small, super handy. With automatic circuit control. Secure crimping in seconds. Automatic locking of pressing tongs. Assortment of REMS pressing tongs Mini for all common pressfitting systems

18 604,00 kr (14 883,20 kr)

Leverantör, 2-3 vardagar leveranstid

Måndag-Fredag:	Endast skriftlig kontakt möjlig.
Lördag, Söndag & danska helgdagar:	Stängt

Kontakta oss

Rems Verktyg för VVS-arbete - sita 5

Rems Press ring M 22 S (PR-2B)

Rems Crimping pliers Mini G 26

Rems Blade for pipe cutters ROS P26/SW 35

Rems Amigo 2 electric clamp R 1/2-2"

Rems Crimping pliers Mini up 20

Rems Crimping pliers Mini M35 - 578390

Rems Intermediate Pliers Mini Z8

Rems Crimping pliers Mini RN26 578440

Rems Crimping pliers M15 570110

Rems Pipe scissors ROS P 42 S

Rems Crimping pliers Mini BMP 5/8"

Rems Press ring M 76.1 XL (PR-3S)

Rems Electric pressure test pump E-Push 2

Rems Pipe support herkules 3B

Rems Press ring M 15 S (PR-2B)

Rems Intermediate pliers Z6 for press rings XL (PR-3S)

Rems Crimping pliers Mini TH20 578358

Rems Mini-Press S 22V ACC Basic-Pack