Rems - sita 5 - Kvalitet till konkurrenskraftiga priser

Rems Battery Nano Li-ion 12V 2.5AH

LiIon PLUS technology. Highly resistant Li-Ion 12V battery with 2.5 Ah capacity for long service life. Powerful and light. Total discharge and overload protection with single cell monitoring. Temperature monitoring during the charging process. Operating temperature range –10 to +60 °C. No memory effect for maximum battery power.

2 785,00 kr (2 228,00 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Amigo 2 electric clamp R 1/2-2"

Powerful, easy-to-operate electric tool for threading with unique, patented support bracket. Ready for use anywhere, without vice. Ideal for repair, renovation, job site.Pipe threads 1/8–2, 16–50 mm. Bolt threads 6–30 mm, 1/4–1. Pipe threads with REMS 4 automatic die head 2 1/2–4.REMS Amigo 2 – extremely strong up to 2.Set incudes Die heads R 1/2 - 3/4 - 1 - 1.1/4 - 1.1/2 - 2

17 552,00 kr (14 041,60 kr)

Beställningsvara - leveranstid kan ej upplysas

Rems Amigo Set R1/2"-3/4"-1"-1 1/4"

Powerful, easy-to-operate electric tool for threading with unique support bracket. Ready for use anywhere, without vice. Ideal for repair, renovation, job site.Pipe threads 18 – 114, 16 – 40 mm Bolt threads 6 – 30 mm, 14 – 1Set includes Die heads R 12 - 34 - 1 - 114REMS Amigo – the smallest, lightest, strongest and fastest up to 114.

10 724,00 kr (8 579,20 kr)

Beställningsvara - leveranstid kan ej upplysas

Rems Electric pressure test pump E-Push 2

Powerful, electric pressure testing pump for pressure and tightness tests of piping systems and receptacles. Testing and pressure range p 60 bar/6 MPa/870 psi. Pumping capacity 6.5 l/min water, hydrous solutions, emulsions, ph-value of liquids 7-10, temperature of liquids 60°C, viscosity of liquids 1.5 mPa s.REMS E-Push 2 – electric charging and testing. Up to 60 bar. With adjustable pressure limiting. 1300 W. Self sucking.

10 479,00 kr (8 383,20 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Battery Ni-MH 12V 2.0Ah 571510

Battery 12 V, 2,0 Ah for many pressingsWith use of charger with impulse-tchnology No memory effect

3 061,00 kr (2 448,80 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Intermediate pliers Z8

Adapter tongs Z8for driving REMS pressing rings S & 45° (PR-2B)

2 066,00 kr (1 652,80 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Intermediate pliers Z2 for Press rings (PR-3S) 42 - 54 mm

Adapter tongs Z2 for driving REMS pressing rings M 42 – 54 (PR-3S)

1 991,00 kr (1 592,80 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers Mini TH26 578362

High compression pressing tongs/pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing tongs/pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC & REMS Mini-Press 22V ACC drive units. Read and follow the installation and assembly instructions of the system provider/manufacturer.

2 164,00 kr (1 731,20 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers Mini TH20 578358

High compression pressing tongs/pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing tongs/pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC & REMS Mini-Press 22V ACC drive units. Read and follow the installation and assembly instructions of the system provider/manufacturer.

2 164,00 kr (1 731,20 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Intermediate pliers Z6 for press rings XL (PR-3S)

For driving REMS pressing rings XL (PR-3S)

5 375,00 kr (4 300,00 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Press ring M 76.1 XL (PR-3S)

REMS pressing ringsHigh compression pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing segments manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

16 161,00 kr (12 928,80 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Crimping pliers Mini HEz 40 578572

High compression pressing tongs/pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing tongs/pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC & REMS Mini-Press 22V ACC drive units. Read and follow the installation and assembly instructions of the system provider/manufacturer.

6 529,00 kr (5 223,20 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Pressing pliers HEz 40 571904

High compression pressing tongs/pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing tongs/pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.

8 700,00 kr (6 960,00 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Press ring M 35 S (PR-2B)

REMS pressing ringsHigh compression pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing segments manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

2 264,00 kr (1 811,20 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Press ring M 22 S (PR-2B)

REMS pressing ringsHigh compression pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing segments manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

1 804,00 kr (1 443,20 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Press ring M 15 S (PR-2B)

REMS pressing ringsHigh compression pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing segments manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

1 739,00 kr (1 391,20 kr)

Leverantör, 2-3 vardagar leveranstid

Rems Pipe support herkules 3B

Height-adjustable material support with ball guide for rotating and stationary pipe and rod material. For crafts and industry. For construction sites and workshops. Pipe Ø (1/8) 1 – 6", Ø (6) 25 – 150 mm. Rod material Ø (6) 25 – 150 mm REMS Herkules – the strong support.

4 427,00 kr (3 541,60 kr)

Beställningsvara - leveranstid kan ej upplysas

Rems MiniScope inspection camera set

Mobile, handy endoscope camera for low-cost inspection and damage analysis of places with difficult access such as cavities, shafts, pipes, etc. For cordless operation.Camera head Ø 8mmREMS MiniScope – Brilliant pictures of cavities, shafts and pipes. DesignUltra light and handy. Controller unit with camera cable set only 0.4 kg. Can be used everywhere, free hand, over head, also in very confined spaces Sturdy, impact-proof plastic housing with ergonomically shaped handle. The buttons are located directly underneath the display so that it is possible to hold the device by the handle and operate the buttons with one hand. On/Off button, button for rotating, mirroring of the image by 180° respectively, button for regulating the brightness of the LEDs in the camera head in 8 stages, button for regulating the brightness of the colour display in 8 stages. Power LED for indicating the operating state. Battery compartment for 4 commercially available 1.5V, AA, LR6 batteries. Plug-screw connections for changing the camera cable set without tools. Sturdy case for controller unit, camera cable set 8-1 and accessories.Controller unit with TFT-LCD colour displayController unit with 2.3 colour display with state of the art TFT-LCD technology for brilliant pictures, 320 × 240 pixels.Battery operationController unit with four 1.5V, AA, LR6 batteries for approx. 6 hours of continuous operation. Exchangeable camera cable set ColorCamera cable set Color, consisting of colour camera Ø 8 mm (640 × 480 pixels), with CMOS sensor, with dimmable white light LEDs for optimum setting of the brightness and fixed focus function, for automatic picture focus, protected against occasional immersion in water (IP 67). Camera cable set Color 8-1 with 1 m flexible push cable and add-on mirror, add-on hook, add-on magnet.

1 700,00 kr (1 360,00 kr)

Leverantör, 2-3 vardagar leveranstid

Måndag-Fredag:	10.00 - 12.00
Lördag, Söndag & danska helgdagar:	Stängt

Kontakta oss